NEC Computer Monitor MD21GS 3MP User Manual

QUICK REFERENCE GUIDE  
MD21GS-3MP  
 
WARNING  
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE  
THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS  
CAN BE FULLY INSERTED.  
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL.  
CAUTION  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM  
WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER  
CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause  
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.  
This symbol alerts the user that important literature concerning the operation and maintenance of this  
unit has been included. Therefore, it should be read carefully in order to avoid any problems.  
Power Cord Important Information  
CAUTION: Please use the power cord provided with this display in accordance with the table  
below. If a power cord is not supplied with this equipment, please contact your supplier. For all  
other cases, please use a power cord that matches the AC voltage of the power outlet and has been  
approved by and complies with the safety standard of your particular country.  
North America  
Hospital Grade  
Japanese  
(for Japanese Market only)  
Plug Type  
European Continental  
Chinese  
Plug Shape  
Country  
Voltage  
U.S.A./Canada  
120  
EU  
China  
220  
Japan  
100  
230  
Intended Use  
The MD21GS-3MP grayscale display is intended to be used for displaying and viewing of digital  
images for diagnosis by trained physicians. To guarantee the display performance as specified, it  
must only be used in conjunction with NEC recommended controller boards as specified in the  
Installation and Maintenance manual for this model.  
European Customers  
Unpacking, Installation and calibration of this display should only be done by authorized and  
trained personnel. Any installation done by a non-authorized person is done under his own risk  
and we accept no responsibility in any device malfunctioning.  
Medical Imaging  
The NEC MD21GS-3MP is designed for 3-megapixel (1536 x 2048) grayscale medical imaging. This  
display comes fully tuned with a setting for gamma correction that complies with the DICOM Part 14  
Standard.  
1
MD21GS3MPquickstart.p65  
1
7/22/04, 9:52 AM  
 
Canadian Department of Communications Compliance Statement  
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing  
Equipment Regulations.  
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to  
CAN/CSA C22.2 No. 601.1.  
FCC Information  
1. Use the attached specified cables with the MD21GS-3MP grayscale display so as not to interfere  
with radio and television reception.  
(A) Please use the supplied power cord or equivalent to ensure FCC compliance.  
(B) Please use the supplied shielded video signal cable, DVI-D to DVI-D cable.  
Use of other cables and adapters may cause interference with radio and television reception.  
2. This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses, and can  
radiate radio frequency energy, and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
• Consult your dealer or an experienced radio/TV technician for help.  
If necessary, the user should contact the dealer or an experienced radio/television technician for  
additionalsuggestions.Theusermayfindthefollowingbooklet,preparedbytheFederalCommunications  
Commission, helpful: ”How to Identify and Resolve Radio-TV Interference Problems.“ This booklet is  
available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-  
00345-4.  
Declaration of the Manufacturer  
We hereby certify that the grayscale monitor MD21GS-3MP is in compliance with Council Directive  
93/42/EEC:  
– EN 60601-1  
– EN 60601-1-2  
– EN 61000-3-2  
– EN 61000-3-3  
and marked with CE.  
NEC-Mitsubishi Electric Visual, Systems Corporation, 4-13-23, Shibaura, Minato-Ku, Tokyo 108-  
0023, Japan  
2
MD21GS3MPquickstart.p65  
2
7/22/04, 9:52 AM  
 
Contents  
Your new NEC Display monitor box* should contain the following:  
• MD21GS-3MP Display with tilt/swivel/pivot/height adjustable stand  
• Power Cords (N.A. Hospital Grade, Europe Continental and Chinese*2)  
• Quick Reference & Setup Guide  
• Installation and Maintenance Guide  
• CD-ROM (GammaComp MD)  
Video Signal Cable (DVI-D to DVI-D cable)  
Power Cord  
Video Signal  
Cable  
INSTALLATION  
&
MAINTENANCE GUIDE  
QUICK REFERENCE  
&
SETUP GUIDE  
MD21GS-3MP  
MD21GS-3MP  
CD-ROM  
Installation and  
Maintenance Guide  
Quick Reference  
Guide  
* Remember to save your original box and packing material to transport or ship the monitor.  
*2 For Japanese market model, only power cord for Japan is provided with this monitor.  
3
MD21GS3MPquickstart.p65  
3
7/22/04, 9:52 AM  
 
Quick Start  
Optional Display Card Installation  
1. Following your PC manufacturers guidelines, open your computer to access a PCI slot.  
2. Place the display card into an available PCI slot and secure all screws.  
3. Replace the computer cover.  
NOTE: For installing driver information, display modes in multimonitor mode, the setting  
the dip switch, please reference the display card manufacturers documentation.  
Connecting the LCD to Your PC  
Once the display card is successfully installed, following these instructions to connect the  
display to your PC.  
1. Shut down your computer and turn off the power.  
2. Connect the DVI-D signal cable to the connector of the display card in your system  
(Figure A.1). NOTE: for dual displays, plug a DVI-D cable into Port 2 of the display  
card (Figure A.1). Tighten all screws.  
3. Remove the cable cover by pressing the two tabs to unlock. Lift the cover to remove  
(Figure B.1).  
4. Connect the DVI-D signal cable to the connector on the back of the display (Figure  
C.1). NOTE: Incorrect cable connections may result in irregular operation, damage  
display quality/components of LCD module, and/or shorten the module life.  
5. Connect one end of the power cord to the AC inlet on the back of the monitor and the  
other end to the power outlet (Figure C.1). Replace the cable cover.  
NOTE: Refer to the Display Adjustment & Mounting section to check tilt, raise and  
lower monitor screen and screen rotation when you manage cables and power cord.  
NOTE: Please refer to the Caution section of this manual for proper selection of AC  
power cord.  
6. Collect cables and power cord and place them under the cable clip (Figure B.1).  
NOTE: Release the cables from the clip before removing the cable cover.  
7. Turn on the monitor with the power switch on the top (portrait) or left side (landscape)  
of the monitor (Figure D1). Turn on the computer. NOTE: DO NOT switch on/off  
repeatedly.  
8. For further adjustments, please refer to the OSM section for a full description of OSM  
controls.  
NOTE: If you have any problems, refer to the Troubleshooting section.  
4
MD21GS3MPquickstart.p65  
4
7/22/04, 9:52 AM  
 
Quick Start  
–continued  
Figure B.1  
Figure A.1  
Port 2 for Dual Monitor  
Figure D.1  
Figure C.1  
5
MD21GS3MPquickstart.p65  
5
7/22/04, 9:52 AM  
 
User Controls  
1. LED  
Indicates power on and signal condition. The LED can be turned on,  
off, or dimmed. Please refer to the Advanced OSM section/LED  
Brightness for further information.  
Green – signal is present and power is on  
Orange – no signal  
2. RESET  
Resets the highlighted control menu to the factory setting.  
Enters the OSM controls and OSM sub menu.  
3. SELECT  
4/5. ADJUST -/+  
6/7. CONTROL </>  
Moves the bar left/right to increase or decrease the adjustment.  
Moves the highlighted area left/right to select control menus.  
Moves the highlighted area up/down to select one of the controls.  
8. EXIT  
Exits the OSM Controls and OSM Main Menu.  
9. Sensor Port  
For optional external sensor used for self calibration and copy calibration.  
10. On-Screen  
Key Guide  
The key guide will automatically appear on the screen when any  
control button on the back is pressed. The key guide will change  
orientation along with the OSM.  
NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear  
allowing you to cancel the RESET function by pressing the EXIT button.  
6
MD21GS3MPquickstart.p65  
6
7/22/04, 9:52 AM  
 
Recommended Use  
Safety Precautions and Maintenance  
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE  
FOLLOWING WHEN SETTING UP AND USING  
THE NEC DISPLAY:  
DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or  
removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to  
qualified service personnel.  
Do not spill any liquids into the cabinet or use your display near water.  
Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage  
points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.  
Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.  
Do not place this product on an unbalanced or unstable cart, stand or table because the monitor  
may fall, causing serious damage.  
Do not place any objects onto the display and do not use the display outdoors.  
The inside of the fluorescent tube located within the display contains mercury.  
Please follow the bylaws or rules of your municipality to dispose of the tube properly.  
Do not bend power cord.  
Do not use monitor in high temperatured, humid, dusty, or oily areas.  
Do not cover vent on display.  
Immediately unplug your monitor from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
When the power supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into the monitor.  
If the monitor has been exposed to rain or water.  
If the monitor has been dropped or the cabinet damaged.  
If the monitor does not operate normally by following operating instructions.  
If glass is broken, handle with care.  
If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.  
Allow adequate ventilation around the monitor so that heat can properly dissipate. Do  
not block ventilated openings or place the monitor near a radiator or other heat  
sources. Do not put anything on top of monitor.  
The power cable connector is the primary means of detaching the system from the  
power supply. The monitor should be installed close to a power outlet which is easily accessible.  
Handle with care when transporting. Save packaging for transporting.  
CAUTION  
Image Persistence  
Image persistence is when a residual or “ghost” image of a previous image remains visible on the  
screen. Unlike CRT monitors, LCD displays’ image persistence is not permanent, but constant images  
being displayed for a long period of time should be avoided.  
To alleviate image persistence, turn off the display for as long as the previous image was displayed.  
For example, if an image was on the display for one hour and a residual image remains, the display  
should be turned off for one hour to erase the image.  
NOTE: As with all personal display devices, NEC-Mitsubishi Electronics Display recommends using a  
moving screen saver at regular intervals whenever the screen is idle or turning off the display when  
not in use.  
7
MD21GS3MPquickstart.p65  
7
7/22/04, 9:52 AM  
 
Recommended Use  
–continued  
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR  
CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE  
FOLLOWING WHEN YOU POSITION THE DISPLAY:  
For optimum results during self and copy calibrations,  
allow 30 minutes for warm-up.  
Adjust the display height so that the top of the screen  
is at or slightly below eye level. Your eyes should look  
slightly downward when viewing the middle of the  
screen.  
Position your display no closer than 16 inches and no  
further away than 28 inches from your eyes. The  
optimal distance is 20 inches.  
Rest your eyes periodically by focusing on an object  
at least 20 feet away. Blink often.  
Position the display at a 90° angle to windows and other light sources to minimize  
glare and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your  
screen.  
Clean the display surface with a lint-free, non-abrasive cloth. Case of persistent dirt,  
wipe with cloth permeated by water, ethanol, isopropyl-alcohol completely. Avoid  
using any cleaning solution or glass cleaner (ex Acid, Alkali and Acetone).  
Adjust the display’s brightness control to enhance readability.  
Position whatever you are looking at most of the time (the screen or reference material)  
directly in front of you to minimize turning your head while you are typing.  
Avoid displaying fixed patterns on the monitor for long periods of time to avoid image  
persistence (after-image effects).  
Ergonomics  
To obtain the best possible ergonomics benefits, we recommend the following:  
Use the preset Size and Position controls with standard signals  
Use the DEFULT White Point Selection  
8
MD21GS3MPquickstart.p65  
8
7/22/04, 9:52 AM  
 
Specifications  
Display Specifications  
MD21GS-3MP Monitor  
Notes  
LCD Module  
Diagonal: 54 cm/21.3 inches  
Viewable Image Size: 54 cm/21.3 inches  
Active matrix; thin film transistor (TFT) liquid  
crystal display (LCD); 0.2115mm dot pitch;  
400 cd/m2 calibrated white luminance;  
700:1 contrast ratio,typical.  
Native Resolution (Pixel Count):  
1536x 2048(Portrait)  
2048 x 1536 (Landscape)  
Input Signal  
Video: Digital Input: DVI  
VideoDot Clock 162MHz Max  
Grayscale Tones  
10 Bit: 1024 (10bit) shades of gray  
from a pallet of 3061 (11.5bit)  
256: 8bit shades of gray  
When used with an NEC recommended 10 bit  
video card  
When used with an NEC recommended 8 bit  
video card  
Synchronization Range  
Viewing Angle  
Horizontal: 31.5 kHz to 96.0 kHz  
Vertical: 30 Hz, 50Hz to 85 Hz  
Automatically  
Automatically  
Left/Right: ±88° (CR > 10)  
Up/Down: ±88° (CR > 10)  
Image Formation Time  
35 ms (Typ.)  
Active  
Display Area  
Landscape: Horiz.: 433 mm/171. inches  
Vert.: 325 mm/12.8 inches  
Portrait: Horiz.: 325 mm/12.8 inches  
Vert.: 433 mm/171. inches  
Power Supply  
Current Rating  
Dimensions  
AC 100-240V ~ 50/60 Hz  
0.7 - 0.3 A  
Portrait: 358.7mm (W) x 514- 560 mm (H) x 200 mm (D)  
14.1 inches (W) x 20.2 - 22.0 inches (H) x 7.9 inches (D)  
Landscape: 467mm (W) x 460 - 506 mm (H) x 200 mm (D)  
18.4 inches (W) x 18.1 - 19.9 inches (H) x 7.9 inches (D)  
Height Adjustment: 46 mm/1.8 inches (Landscape)  
Weight  
11.7 kg/25.8 lbs  
Environmental Considerations  
Operating Temperature: 5˚C to 40˚C/41˚F to 104˚F  
Humidity: 30% to 80%  
Feet: 0 to 10,000 Feet/0 to 3,048 m  
Storage Temperature: -20˚C to 60˚C/-4˚F to 140˚F  
Humidity: 10% to 85%  
Feet: 0 to 40,000 Feet/0 to 12,192 m  
9
MD21GS3MPquickstart.p65  
9
7/22/04, 9:52 AM  
 
References  
North America and Canada  
NEC-Mitsubishi Monitor Customer Service & Support  
Customer Service and Technical Support:  
Fax:  
(800) 632-4662  
(800) 695-3044  
Parts and Accessories/Macintosh  
Cable Adapter:  
(888) NEC-MITS [888-632-6487]  
Warranty Information:  
Online Technical Support  
Sales and Product Information  
Sales Information Line:  
Canadian Customers:  
(888) NEC-MITS [888-632-6487]  
(866) 771-0266, Ext#: 4037  
(800) 284-6320  
Government Sales:  
Government Sales email:  
Electronic Channels  
World Wide Web:  
Product Registration:  
Drivers and Downloads  
Europe  
NEC-Mitsubishi Electronics Display-Europe GmbH  
Landshuter Allee 12 -14  
D-80637 München  
Phone: +49(0)89 99699 - 0  
Electronic Channels  
World Wide Web:  
10  
MD21GS3MPquickstart.p65  
10  
7/22/04, 9:52 AM  
 

Miele Dishwasher G658SCVI User Manual
Miller Electric Welding System XLi User Manual
Multiquip Portable Generator DCA 400SSV User Manual
NETGEAR Network Router GS108Ev3 User Manual
NordicTrack Home Gym NTCCEX04901 User Manual
Optimus Home Theater System PRO LS1 User Manual
Optimus Stereo Amplifier 120 1971 User Manual
Oregon Scientific Clock AS 316NE User Manual
Panasonic Network Card MAZDxxxG Series User Manual
Panasonic Security Camera BB HCM403 User Manual