Omron Switch G3M User Manual

Solid State Relay  
G3M  
1, 2, 3 and 5 A single in-line package SSR  
D Thin design for high-density PCB applications.  
D DC input-AC output for up to a 5-A load.  
D Two foot prints offer greater flexibility.  
D Approved by UL and CSA.  
Ordering Information  
To order: Select the part number and add the desired input voltage rating, (e.g., G3M-202P-US DC5)  
Isolation  
Input terminal  
pitch  
Zero cross  
function  
Indicator  
No  
Rated output load  
Rated input voltage  
Model  
(Applicable output load)  
5 VDC  
Phototriac 7.62 mm  
Yes  
2 A at 100 to 240 VAC  
(2 A at 75 to 264 VAC)  
G3M-202P-US  
12 VDC  
24 VDC  
5 VDC  
3 A at 100 to 240 VAC  
(3 A at 75 to 264 VAC)  
G3M-203P  
G3M-205P  
12 VDC  
24 VDC  
5 VDC  
5 A at 100 to 240 VAC  
(5 A at 75 to 264 VAC)  
12 VDC  
24VDC  
5 VDC  
No  
2 A at 100 to 120 VAC  
(2 A at 75 to 132 VAC)  
G3M-102PL-US  
G3M-202PL-US  
G3M-203PL  
12 VDC  
24 VDC  
5 VDC  
2 A at 100 to 240 VAC  
(2 A at 75 to 264 VAC)  
12 VDC  
24 VDC  
5 VDC  
3 A at 100 to 240 VAC  
(3 A at 75 to 264 VAC)  
12 VDC  
24 VDC  
5 VDC  
5 A at 100 to 240 VAC  
(5 A at 75 to 264 VAC)  
G3M-205PL  
12 VDC  
24 VDC  
(This table continues on the next page.)  
1
Solid State Relay G3M  
 
J CHARACTERISTICS  
Item  
G3M-102PL-US (-4)  
G3M-202P(L)-US (-4)  
G3M-203P(L) (-4)  
G3M-205P(L) (-4)  
Operate time  
1 ms max. (1/2 of load power source cycle + 1 ms max. for G3M-202P, G3M-203P, G3M-205P)  
1/2 of load power source cycle + 1 ms max.  
Release time  
Output ON voltage drop  
Leakage current  
1.6 V (RMS) max.  
2 mA max. (at 100 VAC) 2 mA max. (at 100 VAC) 1.5 mA (at 200 VAC)  
5 mA max. (at 200 VAC)  
Insulation resistance  
Dielectric strength  
Vibration resistance  
Shock resistance  
1,000 Mmin. (at 500 VDC)  
2,000 VAC, 50/60 Hz for 1 min  
2,500 VAC, 50/60 Hz for 1 min  
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude  
2
Malfunction: 1,000 m/s {approx. 100G}  
Ambient temperature  
Operating: --30°C to 80°C (with no icing or condensation)  
Storage: --30°C to 100°C (with no icing or condensation)  
Approved standards  
UL508 File No.E64562/CSA C22.2 (No.0, No.14) File No. LR35535  
TÜV R9551055 (EN60950)  
Ambient humidity  
Weight  
Operating: 45% to 85%  
Approx. 15 g  
Approx. 25 g  
J APPROVALS  
UL (File No. E64562)/CSA (File No. LR35535)  
Input Voltage  
5, 12, 24 VDC  
SSR Type  
Load Rating  
With Suffixes 102 and  
US or UTU  
2 A, 125 VAC, Resistive 250 W, 125 VAC, Tungsten 2 A FLA, 12 A LRA, 125 VAC  
2 A, 250 VAC, Resistive 500 W, 250 VAC, Tungsten 2 A FLA, 12 A LRA, 250 VAC  
2 A, 250 VAC, Resistive 250 W, 250 VAC, Tungsten 1 FLA, 6 LRA, 250 VAC  
With Suffixes 202 and  
US  
With Suffixes 202  
UTU, UTU-1, and  
UTU-2  
With Suffixes 103 and  
US or UTU  
3 A, 125 VAC, Resistive 375 W, 125 VAC, Tungsten 1.5 A FLA, 9 A LRA, 125 VAC  
3 A, 250 VAC, Resistive 750 W, 250 VAC, Tungsten 1.5 A FLA, 9 A LRA, 250 VAC  
With Suffixes 203 and  
US or UTU  
With Suffix 105  
With Suffix 205  
5 A, 125 VAC, Resistive 625 W, 125 VAC, Tungsten 2.5 A FLA, 15 A LRA, 125 VAC  
5 A, 250 VAC, Resistive 1250 W, 250 VAC, Tungsten 2.5 A FLA, 15 A LRA, 250 VAC  
3
Solid State Relay G3M  
 
Engineering Data  
Load Current vs. Temperature Ambient  
Inrush Current Immunity  
Non-repetitive  
Reduce the current to 1/2 or less if the  
G3M is in repetitive operation.  
Load Current vs. Ambient Temperature (Close Mounting)  
G3M-205 (5-A Load)  
D Thirty Relays are soldered to the PCB at each given spacing.  
D Continuous power.  
4
Solid State Relay G3M  
 
Dimensions  
Note: All units are in millimeters unless otherwise indicated.  
G3M-102PL-US(-4), G3M-202P(L)-US(-4)  
G3M-203P(L)(-4)  
PCB Dimensions  
(Bottom View)  
Terminal Arrangement  
(Bottom View)  
G3M-205P(L)(-4)  
Precautions  
Protective Element  
No overvoltage absorption element is built in. Therefore, if the G3M  
is connected to an inductive load, be sure to connect the overvol-  
tage absorption element.  
5
Solid State Relay G3M  
 
(a) Outdoor use, use involving potential chemical contamination or electrical  
interference.  
Omron Electronic Components, LLC  
Terms and Conditions of Sales  
(b) Use in consumer Products or any use in significant quantities.  
(c) Energy control systems, combustion systems, railroad systems, aviation systems,  
medical equipment, amusement machines, vehicles, safety equipment, and  
installations subject to separate industry or government regulations.  
(d) Systems, machines, and equipment that could present a risk to life or property.  
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING  
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE  
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND  
THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE  
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.  
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED  
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION  
BY SELLER.  
I. GENERAL  
1. Definitions: The words used herein are defined as follows.  
(a) Terms:  
(b) Seller:  
(c) Buyer:  
These terms and conditions  
Omron Electronic Components LLC and its subsidiaries  
The buyer of Products, including any end user in section III through VI  
(d) Products: Products and/or services of Seller  
(e) Including: Including without limitation  
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,  
invoices, purchase orders and other documents, whether electronic or in writing,  
relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed  
in Buyer’s purchase order or other documents which are inconsistent with, or in  
addition to, these Terms.  
5. Programmable Products: Seller shall not be responsible for the Buyer’s programming  
of a programmable Product.  
3. Distributor: Any distributor shall inform its customer of the contents after and including  
section III of these Terms.  
IV. WARRANTY AND LIMITATION  
II. SALES  
1. Warranty: Seller’s exclusive warranty is that the Products will be free from defects in  
materials and workmanship for a period of twelve months from the date of sale by  
Seller (or such other period expressed in writing by Seller). SELLER MAKES NO  
WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL  
OTHER WARRANTIES, NON--INFRINGEMENT, MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE OF THE PRODUCTS.  
2. Buyer Remedy: Seller’s sole obligation hereunder shall be to replace (in the form  
originally shipped with Buyer responsible for labor charges for removal or replacement  
thereof) the non-complying Product or, at Seller’s election, to repay or credit Buyer an  
amount equal to the purchase price of the Product; provided that there shall be no  
liability for Seller or its affiliates unless Seller’s analysis confirms that the Products were  
handled, stored, installed and maintained and not subject to contamination, abuse,  
misuse or inappropriate modification. Return of any Products by Buyer must be  
approved in writing by Seller before shipment.  
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR  
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF  
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED  
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,  
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT  
SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL  
PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED.  
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its  
employees from and against all liabilities, losses, claims, costs and expenses (including  
attorney’s fees and expenses) related to any claim, investigation, litigation or  
proceeding (whether or not Seller is a party) which arises or is alleged to arise from  
Buyer’s acts or omissions under these Terms or in any way with respect to the  
Products.  
1. Prices; Payment: All prices stated are current, subject to change without notice by  
Seller. Buyer agrees to pay the price in effect at time of shipment. Payments for  
Products received are due net 30 days unless otherwise stated in the invoice. Buyer  
shall have no right to set off any amounts against the amount owing in respect of this  
invoice.  
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to  
Buyer after deducting transportation charges, taxes and duties, and will be allowed  
only if (a) the invoice is paid according to Seller’s payment terms and (b) Buyer has no  
past due amounts owing to Seller.  
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the  
maximum legal rate, whichever is less, on any balance not paid within the stated  
terms.  
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.  
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer  
shall make remittance to Seller at the then current exchange rate most favorable to  
Seller; provided that if remittance is not made when due, Buyer will convert the amount  
to U.S. dollars at the then current exchange rate most favorable to Seller available  
during the period between the due date and the date remittance is actually made.  
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining  
any government approvals regarding the importation or sale of the Products.  
7. Taxes: All taxes, duties and other governmental charges (other than general real  
property and income taxes), including any interest or penalties thereon, imposed  
directly or indirectly on Seller or required to be collected directly or indirectly by Seller  
for the manufacture, production, sale, delivery, importation, consumption or use of the  
Products sold hereunder (including customs duties and sales, excise, use, turnover  
and license taxes) shall be charged to and remitted by Buyer to Seller.  
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to  
Seller, Seller reserves the right to stop shipments or require satisfactory security or  
payment in advance. If Buyer fails to make payment or otherwise comply with these  
Terms or any related agreement, Seller may (without liability and in addition to other  
remedies) cancel any unshipped portion of Products sold hereunder and stop any  
Products in transit until Buyer pays all amounts, including amounts payable hereunder,  
whether or not then due, which are owing to it by Buyer. Buyer shall in any event  
remain liable for all unpaid accounts.  
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer  
indemnifies Seller fully against all costs or expenses arising in connection therewith.  
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting  
from causes beyond its control, including earthquakes, fires, floods, strikes or other  
labor disputes, shortage of labor or materials, accidents to machinery, acts of  
sabotage, riots, delay in or lack of transportation or the requirements of any  
government authority.  
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:  
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise  
stated in writing by Seller), at which point title to and all risk of loss of the Products  
shall pass from Seller to Buyer, provided that Seller shall retain a security interest  
in the Products until the full purchase price is paid by Buyer;  
V. INFORMATION; ETC.  
1. Intellectual Property: The intellectual property embodied in the Products is the  
exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it  
in any way without the written permission of Seller. Buyer (at its own expense) shall  
indemnify and hold harmless Seller and defend or settle any action brought against  
Seller to the extent that it is based on a claim that any Product made to Buyer  
specifications infringed intellectual property rights of another party.  
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or  
tooling, all engineering and tooling shall remain the exclusive property of Seller. All  
information and materials supplied by Seller to Buyer relating to the Products are  
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted  
employees and strictly prevent disclosure to any third party.  
3. Performance Data: Performance data is provided as a guide in determining suitability  
and does not constitute a warranty. It may represent the result of Seller’s test  
conditions, and the users must correlate it to actual application requirements.  
4. Change In Specifications: Product specifications and description may be changed at  
any time based on improvements or other reasons. It is Seller’s practice to change  
part numbers when published ratings or features are changed, or when significant  
engineering changes are made. However, some specifications of the Product may be  
changed without any notice.  
5. Errors And Omissions: The information on Seller’s website or in other documentation  
has been carefully checked and is believed to be accurate; however, no responsibility  
is assumed for clerical, typographical or proofreading errors or omissions.  
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses  
regarding (a) export of the Products or information provided by Seller; (b) sale of  
Products to forbidden or other proscribed persons or organizations; (c) disclosure to  
non-citizens of regulated technology or information.  
(b) Delivery and shipping dates are estimates only; and  
(c) Seller will package Products as it deems proper for protection against normal  
handling and extra charges apply to special conditions.  
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products  
occurring before delivery to the carrier must be presented in detail in writing to Seller  
within 30 days of receipt of shipment.  
III. PRECAUTIONS  
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY  
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED  
VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR  
DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH  
RESPECT TO THE BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR  
ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END  
PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING  
ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products  
will meet their requirements of the intended use in all cases. Buyer must know and  
observe all prohibitions of use applicable to the Product/s.  
2. Use with Attention: The followings are some examples of applications for which  
particular attention must be given. This is not intended to be an exhaustive list of all  
possible use of any Product, nor to imply that any use listed may be suitable for any  
Product:  
VI. MISCELLANEOUS  
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing  
between Buyer and Seller shall operate as a waiver of rights by Seller.  
2. Assignment: Buyer may not assign its rights hereunder without Seller’s written consent.  
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).  
Federal and state courts in Illinois have exclusive jurisdiction for any dispute  
hereunder.  
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller  
relating to the Products, and no provision may be changed or waived unless in writing  
signed by the parties.  
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision  
shall not invalidate any other provision.  
6
Solid State Relay G3M  
 
Certain Precautions on Specifications and Use  
1. Suitability of Use. Seller shall not be responsible for conformity with any  
standards,codes orregulations whichapply tothecombinationoftheProd-  
uct in Buyer’s application or use of the Product. At Buyer’s request, Seller  
willprovideapplicablethirdparty certificationdocuments identifyingratings  
and limitations of use which apply to the Product. This information by itself  
is not sufficient for a completedetermination of the suitability of theProduct  
in combination with the end product, machine, system,or otherapplication  
or use. Buyer shall be solely responsible for determining appropriateness  
oftheparticular ProductwithrespecttoBuyer’s application,productorsys-  
tem. Buyer shalltakeapplicationresponsibility inallcases but thefollowing  
is a non-exhaustive list of applications for which particular attention must  
be given:  
2. ProgrammableProducts. Seller shallnotberesponsiblefor theuser’s pro-  
gramming of a programmable product, or any consequence thereof.  
3. Performance Data. Performance data given in this publication is provided  
as a guide for the user in determining suitability and does not constitute a  
warranty. It may represent the result of Seller’s test conditions, and theus-  
ers must correlate it to actual application requirements. Actual perfor-  
mance is subject to Seller’s Warranty and Limitations of Liability.  
4. Change in Specifications. Product specifications and accessories may  
be changed at any time based on improvements and other reasons. It is  
our practice to change part numbers when published ratings or features  
are changed, or when significant construction changes are made. How-  
ever, some specifications of the Product may be changed without any no-  
tice. When in doubt, special part numbers may be assigned to fix or es-  
tablish key specifications for your application. Please consult with your  
Seller representative at any time to confirm actual specifications of pur-  
chased Product.  
(i) Outdoor use, uses involving potential chemical contamination or  
electrical interference, or conditions or uses not described in this  
document.  
(ii) Energy control systems, combustion systems, railroad systems,  
aviation systems, medical equipment, amusement machines,  
vehicles, safety equipment, and installations subject to separate  
industry or government regulations.  
(iii) Use in consumer products or any use in significant quantities.  
(iv) Systems, machines and equipment that could present a risk to life or  
property. Please know and observe all prohibitions of use applicable  
to this product.  
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SE-  
RIOUSRISKTO LIFEORPROPERTYWITHOUTENSURING THATTHE  
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE  
RISKS, AND THAT THEOMRON PRODUCTISPROPERLYRATEDAND  
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIP-  
MENT OR SYSTEM.  
5. Errors and Omissions. The information in this publication has been care-  
fully checked and is believed to be accurate; however, no responsibility  
is assumed for clerical, typographical or proofreading errors, or omis-  
sions.  
6. RoHS Compliance. Where indicated, our products currently comply, to  
the best of our knowledge as of the date of this publication, with the re-  
quirements of the European Union’s Directive on the Restriction of certain  
Hazardous Substances (“RoHS”), although the requirements of RoHS do  
not take effect until July 2006. These requirements may be subject to  
change. Please consult our website for current information.  
7
Solid State Relay G3M  
 
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website  
at www.omron.com/oei under the “About Us” tab, in the Legal Matters section.  
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.  
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.  
OMRON ON-LINE  
OMRON ELECTRONIC  
COMPONENTS LLC  
55 E. Commerce Drive, Suite B  
Schaumburg, IL 60173  
847-882-2288  
01/07  
Specifications subject to change without notice  
Printed in USA  
Cat. No. J01C-E-01  
 

Nady Systems Microphone DKW8 User Manual
NEC Flat Panel Television P551AVT User Manual
NETGEAR Modem XM128S User Manual
Nokia Cell Phone 2855i User Manual
Nokia Cell Phone 2855 User Manual
Omnimount TV Mount OM10049 User Manual
Oregon Scientific Radar Detector RM998PA User Manual
Oster Toaster TSSTRTS251 033 User Manual
Palm Cell Phone Treo 750v User Manual
Panasonic Battery Charger EY0L81 User Manual