Pelco Microscope Magnifier C1993M User Manual

C1993M (2/01)  
VIEWSTN/1  
Viewing Station  
®
IMPORTANT SAFEGUARDS AND WARNINGS  
Prior to installation and use of this product, the following WARNINGS should be observed.  
3500 Pelco Way  
Clovis, CA 93612-5699  
USA  
1. Installation and servicing should only be done by qualified service personnel and conform  
to all local codes.  
In North America & Canada:  
Tel (800) 289-9100  
FAX (800) 289-9150  
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure,  
it is designed for indoor use only and it must not be installed where exposed to rain and  
moisture.  
International Customers:  
Tel +1(559) 292-1981  
FAX +1(559) 348-1120  
3. Only use replacement parts recommended by Pelco.  
4. The installatioin method and materials should be capable of supporting four times the  
weight of the unit and equipment.  
The product and/or manual may bear the following marks:  
This symbol indicates that danger-  
ous voltage constituting a risk of  
electric shock is present within this  
C A U T I O N :  
unit.  
RISK OF ELECTRIC SHOCK.  
DO NOT OPEN.  
This symbol indicates that there  
are important operating and main-  
tenance instructions in the litera-  
ture accompanying this unit.  
Please thoroughly familiarize yourself with the information in this manual prior to installation and  
operation.  
DESCRIPTION  
Pelco’s VIEWSTN/1 Public Viewing Station is specifically designed for retail applications to  
provide a clear, visual warning to potential shoplifters that these premises are under surveillance.  
When properly installed the station is an effective deterrent against shoplifting.  
The VIEWSTN/1 includes:  
Qty Description  
1
Monitor/camera mount  
1
1
1
4
2
Mount arm  
Monitor rack  
Tube MS03-0202-2000 (anti-seize)  
10-32 x .50 Allen head bolts and washers  
5/16-18 x .75 Allen head bolts and locking washers  
1
1
Color monitor and power cord  
Color camera  
 
TOP SWIVEL COLLAR, SET SCREW  
BOTTOM SWIVEL COLLAR, SET SCREW  
SWIVEL COLLAR  
SET SCREW  
CAMERA  
FEEDTHROUGH  
CAMERA MOUNTING DETAIL  
MONITOR  
FEEDTHROUGH  
LIP  
BACK OF MONITOR DETAIL  
MONITOR RACK DETAIL  
00427  
Figure 1. Viewing Station Installation  
 
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment.  
If  
a
warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or  
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following  
information:  
1. Model and serial number  
Exceptions to this warranty are as noted below:  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
If there is a dispute regarding the warranty of a product which does not fall under the  
warranty conditions stated above, please include a written explanation with the product  
when returned.  
Three years on Camclosure® and fixed camera models, except the CC3701H-2,  
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,  
which have a five-year warranty.  
Method of return shipment shall be the same or equal to the method by which the item was  
received by Pelco.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series  
fixed dome products.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at  
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned  
for credit, and RA number if returned for repair).  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in  
continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing  
charge.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and EnduraSeries distributed network-based video products.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA  
number and freight should be prepaid. Ship to the appropriate address below.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are  
instructed to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from  
the specific use or application made of the Products. Pelcos liability for any claim, whether  
based on breach of contract, negligence, infringement of any rights of any party or product  
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for  
such Products. In no event will Pelco be liable for any special, incidental or consequential  
damages (including loss of use, loss of profit and claims of third parties) however caused,  
whether by the negligence of Pelco or otherwise.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco c/o Expeditors  
473 Eccles Avenue  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
REVISION HISTORY  
Manual # Date  
C1993M 2/01  
Comments  
Original version.  
Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
©Copyright 2001, Pelco.  
All rights re served.  
 

Peavey Car Speaker SP 118 User Manual
Philips Flat Panel Television M2239CLE1T User Manual
Philips Power Supply R6LS4A User Manual
Philips Security Camera WV NW484S User Manual
Philips Speaker SBC BS010 User Manual
Philips Video Gaming Accessories SGC5103BD User Manual
Pioneer CD Player CDJ 2000nexus User Manual
Pioneer GPS Receiver AVIC Z120BT User Manual
Pioneer Stereo System VSX 72TXV User Manual
Poulan Blower 115351327 User Manual