3M Cordless Saw E 9BM User Manual

Scotchlok E-9BM Crimping Tool  
812031  
Application  
The ScotchlokE-9BM Crimping Tool, with adjustable jaw inserts, crimps Scotchlokdiscrete type  
connectors and is a maintenance tool for modular splicing.  
Selection and Installation of Jaw Inserts  
1.  
Select the jaw insert combination to be used. See Table 1.  
2.  
Remove the jaw inserts from the jaw using a  
screwdriver. See Figure 1.  
3.  
Install the jaw inserts in the positions selected by  
pushing the tool firmly against a hard surface until they  
snap into position.  
TABLE 1  
Connector Type  
Jaw Inserts  
All Scotchlok Butt and Tap type connectors  
Thick - Thick  
812032  
UDW, UIB, UIR and UIY Inline connectors  
Thick - Thin  
Thick-Thin  
All MS2™ Cross-Connect Modules, all Scotchlok  
Inline connectors and all 4000 and 4008 Series  
Modular connectors  
Figure 1. Removal of jaw inserts  
Super-Mini 4005 Bridge & 4005DPM Modules  
Thin - Thin  
May 1997  
34-7015-5255-5-B  
 

3D Connexion Refrigerator OL 12491 01 User Manual
Acer Projector P5271n User Manual
AEG Dishwasher 50730 User Manual
AKG Acoustics Microphone C 535 EB User Manual
Allied Telesis Network Router 86241 01 User Manual
Alto Shaam Kitchen Entertainment Center 750 S SERIES User Manual
American Standard Indoor Furnishings 0211008 User Manual
American Standard Outdoor Shower 1660502 User Manual
AMX Network Card Octaire User Manual
Beko Double Oven BDC 545 A User Manual