3M Projector MPro120 User Manual

3M MPro120  
3
 
3MPocket Projector MPro120  
Contents  
Intended Use Statement .........................................................................................4  
Trademarks and Copyrights ....................................................................................4  
Safety Information..................................................................................................4  
Safety Labels ........................................................................................................7  
Package Contents................................................................................................10  
Parts...................................................................................................................11  
Getting Started ....................................................................................................12  
Making Connections.............................................................................................15  
Operating Instructions ..........................................................................................19  
Troubleshooting ...................................................................................................24  
Specifications ......................................................................................................26  
Limited Warranty..................................................................................................28  
© 2009 3M. All Rights Reserved.  
3
 
3MPocket Projector MPro120  
Intended Use Statement  
The 3MPocket Projector MPro120 is designed to operate with the 3M-specified battery and  
3M battery charger and in a normal office and home environment.  
10˚–35˚C (50˚–95˚F)  
10–80% RH (without condensation)  
0–1829 m (0–6000 feet) above sea level  
The ambient operating environment should be free of airborne smoke, grease, oil and other  
contaminants that can affect the operation or performance of the projector.  
Use of this product in adverse conditions will void the product warranty.  
Trademarks and Copyrights  
3M is a trademark of 3M Company.  
VGA and XGA are trademarks of International Business Machines Corporation.  
S-VGA is a registered trademark of the Video Electronics Standards Association.  
No publication or commercial use may be made of this material without the express written  
permission of 3M.  
Safety Information  
Please read, understand, and follow all safety information contained in these instructions prior  
to the use of this projector. Retain these instructions for future reference.  
Explanation of Signal Word Consequences  
Indicates a potentially hazardous situation, which, if not avoided, could result in  
death or serious injury and/or property damage.  
m Warning:  
Indicates a potentially hazardous situation, which, if not avoided, may result in minor  
or moderate injury and/or property damage.  
m Caution:  
4
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
m Warning  
To reduce the risk associated with hazardous voltage:  
Do not modify this product in any way. Use only 3M approved replacement components.  
Do not attempt to service this projector other than battery replacement. There are  
no user serviceable parts other than the battery. Service to be performed only by a  
3M-authorized service provider using 3M-approved system components.  
Do not use the wall power supply in a wet environment.  
Do not use with a damaged wall power supply. Replace damaged part prior to use.  
To reduce the risk associated with fire and explosion:  
Do not immerse the projector or battery in any liquid or allow either to get wet.  
Use only 3M approved power supply and Li-Ion polymer battery provided.  
Do not disassemble or short circuit the battery.  
Do not dispose of the battery by incineration or fire.  
Do not operate this projector in any environment above 35°C (95°F).  
Do not expose the projector or battery to direct sunlight in a closed space such as  
a vehicle.  
Do not carry the battery in pockets, purses or handbags where it may contact  
metal objects.  
Do not place battery in contact with metal objects.  
Do not expose or store battery in direct sunlight, or excessive heat (>60 C or 140 F)  
moist or caustic environments.  
To reduce the risks associated with driver distraction:  
Do not use this projector in a moving motor vehicle.  
© 2009 3M. All Rights Reserved.  
5
 
3MPocket Projector MPro120  
m Warning  
To reduce the risk associated with fire and explosion, battery leakage or  
overheating:  
Do not immerse the battery in water or allow to get wet.  
Do not reverse the positive(+) and negative(-) terminals.  
Do not connect the battery directly to a wall outlet. Use only the 3M-specified wall  
charger or automobile charger.  
Do not strike, throw or subject the battery to physical shock.  
Do not pierce the battery or break it open.  
Keep batteries out of the reach of children.  
Do not recharge the battery near a heat source or in extremely hot conditions.  
Do not use the battery if it gives off an odor, generates heat, or becomes discolored  
or deformed.  
Keep away from exposed flames if the battery leaks or emits an odor.  
Flush the eyes with water and seek medical attention if the battery leaks and electrolyte  
gets in the eyes.  
m Caution  
To reduce the risk associated with environmental contamination:  
Dispose of all system components in accordance with applicable government  
regulations.  
To reduce the risks associated with LED bright light:  
Do not stare directly into the projector lens.  
To reduce the risks associated with tripping and falling:  
Position the charging cord and data cables so that they can not be tripped over.  
SAVE THESE INSTRUCTIONS  
6
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
Safety Labels  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
LITHIUM ION POLYMER BATTERY  
Model No. BLP508-001  
3.7V 2200mAh 8.1Wh  
P/N 78-6972-0004-2  
m Warning  
Use a specified charger.  
Do not throw the battery into fire or heat.  
Do not short-circuit the battery terminals.  
Do not disassemble the battery.  
Charging Specification  
Standard Charge  
Cut Off Current  
0.44A/4.2V  
44mA  
Max Charge  
2.2A/4.2V  
44mA  
Cut Off Current  
LED Light Output  
Maximum Radiant Power:  
0.59 mW  
CLASS 1 LED PRODUCT  
IEC60825-1 :1993+A1 :1997+A2:2001  
© 2009 3M. All Rights Reserved.  
7
 
3MPocket Projector MPro120  
FCC STATEMENT - CLASS B  
This equipment generates, uses and can radiate radio frequency energy, and if not installed  
and used in accordance with the instruction manual may cause interference to radio  
communications. It has been tested and found to comply with the limits for a Class “B”  
computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed  
to provide reasonable protection against such interference when operated in a residential  
installation. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
NOTICE: This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC  
equipment provided that the following conditions are met. If the cables include a EMI ferrite  
core, attach the ferrite core end of the cable to the projector. Use the cables which are included  
with the projector or specified.  
Note: Changes or modifications not expressly approved by the party responsible for  
compliance could void the user’s authority to operate the equipment.  
CE Statement  
ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive  
Low Voltage Directive: Meets 2006-95-EC Directive.  
8
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
WEEE Statement  
The following information is only for EU-members States:  
The mark shown to the right is in compliance with Waste Electrical  
and Electronic Equipment Directive 2002/96/EC (WEEE). The  
mark indicates the requirement NOT to dispose the equipment as  
unsorted municipal waste, but use the return and collection systems  
according to local law.  
RoHS Statement  
3M Projection Systems can provide RoHS certification for products meeting the RoHS  
directive.1  
European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC,  
1 RoHS compliant means that the product or part does not contain any of the substances in excess of the  
following maximum concentration values in any homogeneous material, unless the substance is in an  
application that is exempt under RoHS, as amended:(a) 0.1% (by weight) for lead, mercury, hexavalent  
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for  
cadmium. This information represents 3M’s knowledge and belief, which may be based on information  
provided by third party suppliers to 3M.  
© 2009 3M. All Rights Reserved.  
9
 
3MPocket Projector MPro120  
Package Contents  
1
2
3
4
5
6
7
8
9
3M Pocket Projector MPro120  
2
Table Top Tripod  
1
Rechargeable Battery  
Carrying Pouch  
4
Outlet Adapters (4)  
Power Adapter  
3
AV Adapters  
Product Warranty and Safety Guide  
Quick Start Guide  
6
10 AV Cable  
5
7
11 VGA-Audio Cable  
8
9
10  
11  
10  
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
1
2
4
5
Parts  
1
2
3
4
5
6
7
8
9
Power Button  
Brightness Mode Button  
Volume Down Button  
Volume Up Button  
Battery Status Button  
Status Indicator  
Focus Wheel  
3
6
Lens  
Speaker  
10 VGA-AV Input  
11 DC Power Input  
12 Battery Cover  
13 Tripod Socket  
14 Flip Stand  
7
8
9
10 11  
12  
13  
14  
9
© 2009 3M. All Rights Reserved.  
11  
 
3MPocket Projector MPro120  
Getting Started  
Install Battery  
The 3M MPro120 comes with a rechargeable battery. The battery is quick and easy to install  
and comes partially charged.  
To install the battery: slide the back cover off, insert the battery, and reinstall the cover.  
Important Note: Use only the 3M-specified battery: 78-6972-0004-2.  
Battery Maintenance Tips:  
Remove the battery when the projector will not be used for one or more weeks.  
Charge and discharge the battery at least once a month.  
When storing a battery for more than a month, store the battery at 50% charge.  
Do not store a fully discharged battery because it may lose the ability to be recharged.  
Do not store a fully charged battery because it may lose the ability to be recharged to  
full power.  
12  
© 2009 3M. All Rights Reserved.  
 
 
3MPocket Projector MPro120  
Power Adapter  
The power adapter is used to charge the battery or power the projector. There are four outlet  
adapters to give you the flexibility to power the 3M MPro120 in most countries.  
You can also power the projector with the 3M MPro120 Car Charger, available separately.  
Installing An Outlet Adapter Onto The Power Adapter  
1
2
Select the outlet adapter that will plug into your wall outlet.  
Align the outlet adapter to the power adapter. Turn the outlet adapter in the direction of  
the “LOCK” arrow to lock it in place.  
Replacing the Outlet Adapter  
1
2
3
4
Push the button on the outlet adapter.  
Turn the outlet adapter in the direction of the “OPEN” arrow.  
Remove outlet adapter.  
Replace with the new outlet adapter.  
© 2009 3M. All Rights Reserved.  
13  
 
3MPocket Projector MPro120  
Charge the Battery  
The 3M MPro120 rechargeable battery gives you up to 4 hours of battery life in normal  
brightness mode. When the battery needs to be charged, the Status Indicator will flash red.  
The battery is charged by connecting the 3M MPro120 power adapter to the projector.  
1
2
3
4
5
Turn the projector power off.  
Connect the power adapter to the projector’s DC in.  
Connect the other end of the power adapter into the electrical outlet.  
The Status Indicator will change to amber while the battery is charging.  
When charging is complete, the Status Indicator will turn off.  
110–240 VAC  
50/60 Hz  
3:00:00  
Important Notes:  
The battery will take longer to charge when the projector is being used.  
On average, the battery will take 3 hours to charge.  
The battery has a lifespan and ages every time it is fully charged and discharged. The  
battery will gradually loose charge capacity as it ages. Therefore, as the battery ages the  
battery life will decrease.  
14  
© 2009 3M. All Rights Reserved.  
 
 
3MPocket Projector MPro120  
Making Connections  
Connecting to a Composite Video Device  
Use the AV Cable to input video from camcorders, digital cameras, DVD players and digital  
media players into the VGA - AV input on the projector.  
1
2
Connect the AV cable to the projector’s VGA-AV input.  
Connect the other end of the AV cable to the video device’s audio and video outputs.  
Tip: Some video devices do not have the standard audio and video connections and may  
require an AV cable specified by the manufacturer. The AV cable allows you to connect  
your video device to your TV monitor or your projector and may be purchased from  
the video device manufacturer. Once you have the AV cable, you may need the cable  
adapters to connect the video device cable and the projector cable.  
© 2009 3M. All Rights Reserved.  
15  
 
3MPocket Projector MPro120  
Connecting to a Component Video Device  
For component video input, you must purchase the optional 3M MPro120 Component AV  
Cable. This cable sends a higher quality video signal for the best possible image.  
1
2
Connect the Component AV cable to the projector’s VGA-AV input.  
Connect the other end of the AV cable to the video device’s audio and video outputs.  
Important Note: There are two red connectors on the Component AV cable. One is for  
the right audio channel and the other is for the Pr component video signal. Be careful to  
connect the red audio to red audio and red video to red video. If these connectors are  
switched, the projected image will appear green and an abnormal noise will come from  
the right speaker.  
16  
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
Tip: Some video devices do not have the standard audio and video connections and may  
require an AV cable specified by the manufacturer. The AV cable allows you to connect  
your video device to your TV monitor or your projector and may be purchased from  
the video device manufacturer. Once you have the AV cable, you may need the cable  
adapters to connect the video device cable and the projector cable.  
Some video devices, by default, will not output a video signal. The video device's manual  
should provide instruction to change the video output setting.  
© 2009 3M. All Rights Reserved.  
17  
 
3MPocket Projector MPro120  
Connecting to a Computer  
Use the VGA-Audio cable to connect the projector to desktop computers, laptop computers,  
ultra-portable computers and some personal digital assistants (PDAs). The projector supports  
VGA, SVGA, XGA, and WXGA resolutions.  
1
2
3
Connect the VGA Cable to the MPro120 projector.  
Connect the VGA Cable to the computer’s video and audio outputs.  
Set the computer resolution to one of the supported resolutions.  
Description  
VGA  
Resolution (width x height)  
640 x 480  
Refresh Rate  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
SVGA  
XGA  
800 x 600  
1024 x 768  
WXGA  
1280 x 768  
18  
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
Operating Instructions  
Powering On  
Press and hold the power button for 3 seconds. Release the power button when the projector  
begins to project an image and the status indicator turns green.  
00:03  
Tip: The video output on some devices is turned off by default. Please refer to the  
device’s documentation for details on enabling the video output.  
Powering Off  
Press and hold the power button for 3 seconds. Release the power button when the projected  
image is gone. The projector is OFF when the Status indicator is OFF or during battery  
charging when the Status Indicator is amber.  
© 2009 3M. All Rights Reserved.  
19  
 
3MPocket Projector MPro120  
Adjusting Image Size  
The 3M MPro120 can project an 8 to 50 inch (203–1270 mm) diagonal image. Refer to the  
chart below.  
Diagonal SIze  
Image Width  
Image Height  
Projector-to-Screen  
Distance  
8 in (20.32 cm)  
14 in (35.56 cm)  
20 in (50.8 cm)  
26 in (66.04 cm)  
32 in (81.28 cm)  
38 in (96.52 cm)  
44 in (111.76 cm)  
50 in (127 cm)  
6 3/8 in (16.2 cm)  
11 1/4 in (28.4 cm)  
16 in (40.6 cm)  
4 3/4 in (12.2 cm)  
8 3/8 in (21.3 cm)  
12 in (30.5 cm)  
6 3/4 in (17.0 cm)  
11 3/4 in (29.9 cm)  
16 3/4 in (42.7 cm)  
21 7/8 in (55.5 cm)  
26 7/8 in (68.3 cm)  
31 7/8 in (81.1 cm)  
37 in (93.9 cm)  
20 3/4 in (52.8 cm)  
25 5/8 in (65.0 cm)  
30 3/8 in (77.0 cm)  
35 1/4 in (89.0 cm)  
40 in (101.6 cm)  
15 5/8 in (39.6 cm)  
19 1/4 in (48.8 cm)  
22 3/4 in (57.9 cm)  
26 3/8 in (67.6 cm)  
30 in (76.2 cm)  
42 in (106.7 cm)  
Important Note: As you increase the size of the projected image, you will need to  
decrease (darken) the ambient room lighting.  
Adjusting the Focus  
Turn the focus wheel to sharpen the image.  
20  
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
Changing the Brightness  
Press the Brightness button to switch between normal brightness (conserves battery power)  
and high brightness (increases light output by 20%). An icon will appear on the screen to  
indicate the current setting.  
High Brightness  
Low Brightness  
Adjusting the Volume  
Press the Volume up or Volume down button to adjust the sound. A volume bar will appear on  
the screen to help you set the volume level.  
Checking the Battery Level  
To check the battery, press the Battery Status button. A battery bar will appear on the screen  
indicating the amount of charge currently in the battery.  
Power Adapter  
Note: The battery status will not appear when the power adapter is connected to  
the projector. The power adapter icon will appear instead.  
© 2009 3M. All Rights Reserved.  
21  
 
3MPocket Projector MPro120  
Attaching the Tripod  
The projector includes a table top tripod that mounts to the bottom of the projector.  
Tip: The 3M MPro120 will attach to most camera tripods.  
Cleaning Projector  
1
Turn off the projector and disconnect power and other cables.  
2
Use a soft cloth such as the 3MHigh Performance Cleaning Cloth to wipe off dust.  
If the dust is difficult to remove, dampen the cloth with clean water and then wipe the  
projector clean. Then use a clean cloth to dry the projector.  
Important Note: Do not use cleaning chemicals or solvents to clean the projector.  
Cleaning chemicals and solvents may cause the plastic parts to discolor.  
22  
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
Status Indicator Lights and On Screen Icons  
Icon  
Description/ Meaning  
The projector is waiting for the A/V cable to be connected.  
The projector detects the audio/video cable.  
The projector detects an NTSC video input signal.  
NTSC  
PAL  
The projector detects a PAL video input signal.  
The projector detects the component audio/video cable.  
The projector detects the video input signal and displays the video  
source’s resolution and refresh rate below the component icon.  
RGB 480i 60Hz  
The projector detects the VGA-Audio cable.  
The projector detects computer input signal and displays the input  
resolution and refresh rate  
800x600 60Hz  
The projector does not support the video signal.  
The projector is measuring and synchronizing to video input signal.  
Projector is off. If the power adapter is connected to the projector and the  
battery is installed, the battery is fully charged.  
Status Indicator Blank  
Status Indicator Green  
The projector is on.  
Status Indicator Amber  
Status Indicator Flashing Red  
The projector is off and charging the battery.  
The projector can not turn on because the battery needs to be charged.  
Status Indicator Flashing Green The projector has overheated and needs to cool.  
© 2009 3M. All Rights Reserved.  
23  
 
 
3MPocket Projector MPro120  
Troubleshooting  
The projector will not turn on.  
The battery is not installed or the power adapter is not connected to the projector and a  
working wall outlet. Test the electrical outlet by plugging another electrical device (like a  
radio) into the wall outlet and confirm that the wall outlet works.  
The battery is installed in the wrong orientation. See “Install Battery” on page 12.  
Hold down the power button until the projector powers up.  
The Status Indicator is flashing red when the power button is held down.  
The battery needs to be charged. See “Charge the Battery” on page 14.  
The image is not visible or is very dim.  
The 3M MPro120 is a battery operated projector and requires controlled lighting  
conditions. The image may appear very dim in brightly lit rooms.  
Make sure the status indicator is green. This indicates that the projector is powered on  
and projecting an image.  
Project the image onto a flat, white surface.  
Decrease the light on the surface where the image is being projected.  
Decrease the size of the image.  
When there is nothing connected to the projector, it will project a white image with the  
red 3M logo.  
The projector is displaying a question mark.  
The projector does not support the video or computer input signal. Switch to a video  
or computer signal that the projector supports. See “Supported Computer Signals” on  
24  
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
A computer is connected to the projector but the projector will not display the  
computer’s image.  
Unplug the VGA-Audio cable from the projector and a white image with the 3M logo  
will display.  
Plug the VGA – Audio cable into the projector and the icon in the upper-left corner of the  
image will change from a “waiting on cable” to the “VGA-Audio cable” icon. See “Status  
The projector is making a noise.  
The projector has a small fan for cooling the LED light source. The fan turns on and off  
automatically based on the projector’s internal temperature. The fan will turn on more  
often in warm environments or at high altitudes.  
The speakers make noise when the volume setting is 4 and nothing is connected to the  
projector audio inputs. This is typical. Reduce the projector’s volume setting to 0.  
The speakers make noise when the component AV cable is not correctly connected  
to the video device. There are two red connectors on the component AV cable. One is  
for the right audio channel and the other is for the Pr component video signal. If these  
connectors are switched, the projected image will appear green and an abnormal noise  
will come from the right speaker.  
My video device is connected to the projector but the projector will not display  
the video.  
Unplug the AV cable from the projector and a white image with the 3M logo will display.  
Plug the AV cable into the projector and the icon in the upper-left corner of the image will  
change from a “waiting on cable” to the “VGA-Audio cable” icon. See “Status Indicator  
The video output on some devices is turned off by default. Please refer to the device’s  
documentation for details on enabling the video output.  
© 2009 3M. All Rights Reserved.  
25  
 
3MPocket Projector MPro120  
Specifications  
Projector  
Description  
Imager  
Specification  
Technology  
Size  
LCOS  
9.4 mm (0.37")  
640 x 480 Pixels  
4:3  
Resolution  
Aspect Ratio  
Projection Distance  
Image Size  
6 ¾ in. – 42 in. (171–1067 mm)  
8 in. – 50 in. Diagonal  
0.84:1  
Throw Ratio (Diagonal: Distance)  
Lens Offset  
1:1 (none)  
Inputs  
DC-in, VGA-AV  
VGA, SVGA, XGA, WXGA  
60 Hz  
Compatible Resolutions  
Vertical Scan Rate  
Horizontal Scan Rate  
Video Compatibility  
Video Resolutions  
Dimensions  
31.5 kHz – 49.68kHz  
NTSC, PAL  
480i, 480p, 576i, 576p  
4.72 x 2.4 x 0.98 in.  
(120 x 60 x 25 mm)  
Weight  
5.6 oz (160 g)  
Tripod Socket  
Operating Conditions  
¼" - 20  
Temperature Range  
Humidity Range  
Altitude Range  
50 – 95°F (10-35°C)  
10–80% RH without condensation  
Sea Level to 1,829 m (6000')  
26  
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
BLP508-001 Rechargeable Lithium-Ion Battery  
Description  
Specification  
Type (BLP508-001)  
Rated Capacity  
Dimensions  
Rechargeable Lithium-Ion Polymer Battery  
3.7V 2200 mAh, 8.1 Wh  
62.4 x 53.8 x 10.5 mm  
Important Note: Do not throw battery into trash. Please dispose of according to federal,  
state, or local laws  
Supported Computer Signals  
Description  
VGA  
Resolution (width x height)  
640 x 480  
Refresh Rate  
60 Hz  
SVGA  
800 x 600  
60 Hz  
XGA  
1024 x 768  
60 Hz  
WXGA  
1280 x 768  
60 Hz  
Replacement Parts / Accessories  
Description  
3M Part Number  
78-6972-0003-4  
78-6972-0004-2  
78-6972-0006-7  
78-6972-0007-5  
78-6972-0002-6  
78-6972-0005-9  
78-6972-0001-8  
78-6969-9997-4  
Power Adapter with US, EU, UK, AUS plugs  
Lithium-Ion Polymer Battery  
AV Video Cable  
VGA Cable  
Car Charger  
Component AV cable  
3M Adapter Cable for Apple®  
Portable Presentation Binder  
© 2009 3M. All Rights Reserved.  
27  
 
 
3MPocket Projector MPro120  
Limited Warranty  
The 3MPocket Projector MPro120 (the “3M product”) is warranted to be free from  
defects in material or manufacture for a period of 1 year from the date of purchase.  
All other accessories included with the 3M product are warranted to be free from defects  
in material or manufacture for a period of 1 year from the date of purchase.  
Optional product accessories that are not sold as part of the 3M product are subject to  
individual warranties.  
THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF ANY AND  
ALL WARRANTIES, EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY  
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR  
ANY INDUSTRY PRACTICE OR CUSTOM OR TRADE USAGE.  
In the event the 3M product fails to conform to the above stated warranties within the  
applicable warranty period, your exclusive remedy shall be, at 3M’s option, to replace or  
repair the 3M product or to refund the purchase price of the 3M product. All replaced parts  
or products become property of 3M. If the product is repaired, 3M will repair the defective  
part(s) with a new or used part(s). If the 3M product is replaced, 3M will replace the 3M  
product with the same or equivalent model and with a new or refurbished 3M product. In the  
case of an approved warranty claim, the replacement 3M product will carry only the remaining  
term of the original 3M product’s warranty period as stated above. For warranty service, you  
must provide proof of the date of the original purchase else the manufacturing code date will  
be used to establish the start date of the warranty. The following are exclusions to the above  
listed warranty:  
a. This warranty does not cover 3M product that is modified or damaged through improper  
storage, misuse, abuse, accident, vandalism, improper installation, neglect, improper  
shipping, damage caused by acts of war, disasters such as fire, flood, and lightning,  
improper electrical current, software problems, interaction with non-3M products, or  
service other than by an 3M Authorized Service Provider, neglect or mishandling by any  
person. Normal wear and tear is not covered under warranty.  
28  
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
b. 3M product is designed to operate in the typical indoor environment. This warranty does  
not cover 3M product used outside of the following circumstances:  
100V–240V AC, 50/60 Hz  
10˚–35˚C (50˚–95˚F)  
10–80% RH (without condensation)  
0–1829 m (0–6000 feet) above sea level  
c. The air intake and exhaust vent must be clear of obstructions. Inadequate air ventilation  
will cause the 3M product to malfunction or will cause damage to the 3M product which  
will void the warranty.  
d. This warranty does not cover any additional costs including, but not limited to, those  
associated with removal, cleaning or installation of the 3M product, adjustments,  
(mechanical or electronic) made to the 3M product.  
e. This warranty covers only normal use of the product. 24-hour-per-day or other excessive  
continual use causes strain and is not considered normal use.  
f.  
This warranty does not cover consumables (e.g., batteries).  
g. This warranty is not transferable.  
h. 3M is not responsible for warranty service should the 3M label or logo or the rating  
label or serial number be removed unless otherwise stated in writing for the purposes of  
private labeling for partnership requirements.  
i.  
This warranty does not cover postage, insurance, or shipping costs incurred in presenting  
your 3M product for warranty service. Said costs are the customer’s responsibility. If a  
claimed defect cannot be identified or reproduced in service, the customer may be held  
responsible for cost incurred. Should your warranty upgrade include a “change out”  
service and the claimed defect cannot be identified or reproduced by the technician, the  
customer will be responsible for call out costs.  
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE 3M  
PRODUCT MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE WITH 3M’S  
INTENDED USE STATEMENT, WILL VOID ALL WARRANTIES AND LIMITED REMEDIES.  
© 2009 3M. All Rights Reserved.  
29  
 
3MPocket Projector MPro120  
EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, 3M SHALL  
NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES  
(INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, REVENUE OR BUSINESS) RESULTING  
FROM, OR IN ANY WAY RELATED TO PERFORMANCE, USE OR INABILITY TO USE ANY OF  
THE 3M PRODUCT. This limitation applies regardless of the legal theory upon which damages  
are sought.  
For warranty support, please call or write your local 3M office or a 3M Authorized Service  
Provider to obtain an RMA # (Return Material Authorization number) before returning  
the product. If you are inside the Continental United States of America, please contact  
3M Customer Service at 1-866-631-1656 or email [email protected].  
What 3M Will Do To Correct Problems:  
If your 3M product requires service, 3M will ask you to bring or send the 3M product,  
securely packaged in its original container or equivalent, along with proof of the date of  
original purchase, to your 3M Service Dealer or 3M Service Center.  
3M will, at its option, repair or replace the defective unit without charge for parts or labor.  
Return of the 3M product will be at 3M’s expense.  
When warranty service involves the exchange of the 3M product or of a part, the item  
replaced becomes 3M property.  
The exchanged 3M product or part may be new or previously refurbished to the  
3M standard of quality, and at 3M’s option, the replacement may be another model of  
like kind and quality.  
3M’s liability for replacement of the warranted 3M product or part will not exceed the  
original retail selling price of the 3M product. Exchange or replacement products or parts  
assume the remaining warranty period of the product covered by this limited warranty.  
30  
© 2009 3M. All Rights Reserved.  
 
3MPocket Projector MPro120  
© 2009 3M. All Rights Reserved.  
31  
 
3M is a trademark of 3M Company.  
3
Projection Systems  
3M Austin Center  
6801 River Place Blvd.  
Austin, TX 78726-9000  
866-631-1656  
Please Recycle. Printed in USA.  
© 3M 2009. All Rights Reserved.  
78-6971-1494-6-A  
 

Abocom Switch HF1000 User Manual
Acer Computer Monitor P205H User Manual
Adaptec Microscope Magnifier 2120S User Manual
AEG Power Supply 1000 S User Manual
Agilent Technologies Blood Glucose Meter AN 372 2 User Manual
Alcatel Carrier Internetworking Solutions Network Router 510 User Manual
Altec Lansing Speaker IM5 User Manual
Altinex Switch MX2414RM User Manual
Amcor Dehumidifier AD 400E User Manual
Audiovox Satellite Radio SRSIR 001FM User Manual