Accton Technology Fondue Maker POWER 3004E User Manual

CheetaHub Power-3004E  
Quick Installation Guide  
 
CheetaHub Power-3004E  
Introduction  
Accton’s CheetaHub Power-3004E is a compact dual-speed  
hub featuring 4 10BASE-T/100BASE-TX auto-sensing ports.  
This hub is completely plug and play, there is no configuration  
necessary. Also, the hub comes with its own versatile hub  
stand and can be mounted anywhere, so it’s ideal for small  
workgroups.  
The components of the CheetaHub Power-3004E are shown  
in the figure below:  
Check the Package  
The CheetaHub Power-3004E includes:  
1 EH3004E-TX  
1 hub stand  
1 user guide  
1 appropriate AC Power Adapter  
1 registration card (please return)  
 
1
Quick Installation Guide  
Side Panel RJ-45 Connectors  
Accton’s CheetaHub Power-3004E features 4 10BASE-T/  
100BASE-TX ports with RJ-45 connectors located on the side  
panel of the hub. Port 1-4 are MDI-X, with a built-in wiring  
crossover that allows for the use of straight-through twisted-  
pair cable for connections to devices without built-in crossover  
ports (i.e., workstations, printers, etc.).  
Port 4 on this hub doubles as a crossover port and a straight-  
through Uplink (daisy-chain) port. The MDI Uplink port makes  
it convenient to connect straight-through cable from the hub to  
a crossover port on another device.  
Mount the Hub  
The CheetaHub Power-3004E with its flexible stand can be  
mounted on any flat or vertical  
surface.  
To mount the hub on a flat surface:  
1 Slide the stand onto the hub base  
(to stand upright) or back (to lay  
flat).  
2 Place the hub on any convenient  
flat surface, such as a desktop or nearby shelf.  
To mount the hub on a vertical surface:  
1 First secure the stand to the  
desired location, such as a  
wall or side of a desk. You  
may use two small screws,  
Velcro™ strips, or any other  
technique.  
2 With the stand secured, slide the hub’s back  
onto the stand.  
Connect PCs to the Hub  
Connect each PC to an RJ-45 port  
on the hub with a straight-through  
twisted-pair cable, maximum  
100 meters (328 ft.). The  
CheetaHub Power-3004E  
will support up to 4 PCs.  
Note that if you are using  
port 4, be sure not to use  
the Uplink port.  
 
2
CheetaHub Power-3004E  
Cascade Devices to the Hub  
If you need more ports, connect a crossover port on another  
device to the Uplink port on the hub with straight-through  
twisted-pair cable, maximum 5 meters (16.4 ft.). Note that if  
you are using the Uplink port you cannot use the fixed  
crossover port on port 4.  
1. Prepare staight-through  
Category 5 twisted-pair  
cable with RJ-45 plugs.  
Make sure the cable does  
not exceed 5 meters (16.4  
feet).  
2. Connect one end of the  
cable to the hub’s uplink  
port. When using the Uplink  
Port be sure not to use Port 4.  
3. Connect the other end of the cable to an MDI-X RJ-45 port  
on the other device (not an MDI port).  
• Alternatively, you can connect from any MDI-X port on the  
hub to an MDI daisy-chain port on the other device.  
• You may also attach to MDI-X ports at both ends if you  
use crossover cabling.  
• When connecting to another 100Mbps Fast Ethernet  
hub, the number of cascaded hubs is limited to two, and  
the total network span allowed is only 205 meters (672  
feet).  
Verify System Operation  
Check each connection by viewing the port status indicators  
shown in the following table. The hub monitors the link status  
for each port. If the Port indicator fails to light when you  
connect a device to the hub, follow the troubleshooting advice  
detailed in the next section.  
Port and Hub Status LEDs  
LEDs  
Power  
Condition  
Green  
Status  
Hub is receiving power.  
Collision 100  
Collision 10  
Port 1 ~ 4  
Flashing  
green  
Indicates that a packet collision has been  
detected on the 100Mbps segment.  
Flashing  
green  
Indicates that a packet collision has been  
detected on the 10Mbps segment.  
Green  
Port has established a valid 100Mbps  
network connection.  
Yellow  
Port has established a valid 10Mbps  
network connection.  
Flashing  
Yellow  
Traffic is traversing the port.  
Memory Error  
Indicates the hub has failed its power-on  
self test. If this occurs, contact your Accton  
dealer for assistance.  
 
3
Quick Installation Guide  
Troubleshooting  
Symptom: Power LED does not light after power on.  
Cause:  
Solution: 1. Check for loose connections.  
2. Check the power outlet by using it for another  
Power outlet or power cord may be defective.  
device.  
3. Replace the power cord.  
Symptom: Port LED does not light after connection is made.  
Cause:  
Hub port, network card or cable may be  
defective.  
Solution: 1. Check that the hub and attached device are  
both powered on.  
2. Be sure the network cable is connected to both  
devices.  
3. Verify that Category 5 cable is used for  
100Mbps connections and Category 3 or  
greater for 10Mbps connections. Also verify  
that the maximum cable length does not exceed  
5 meters (16.4 feet) when connecting to a  
100Mbps hub, or 100 meters (328 feet) when  
connecting to any other device.  
4. Check the network card and cable connections  
for defects.  
5. Replace the defective card or cable if  
necessary.  
Application Diagram  
 
4
CheetaHub Power-3004E  
Specifications  
Standards Conformance IEEE 802.3, IEEE 802.3u, ISO/IEC 8802-3  
Number of Ports  
4 RJ-45 ports  
Ports 1-3: Twisted-pair, fixed crossover  
Port 4: Twisted-pair, choice between fixed  
crossover or straight-through (daisy-chain  
port)  
Network Interface  
RJ-45: 100 ohm, UTP cable  
10BASE-T: Categories 3, 4, or 5  
100BASE-TX: Category 5  
Switching Method  
MAC Address Table  
Memory Buffer  
Filtering Rate  
Store-and-forward  
1.7K entries per system  
240 Kbytes per system  
Full line speed  
Forwarding Rate  
Learning Rate  
Dimensions  
Full line speed  
Full line speed  
130 x 95 x 40 mm (5.1 x 3.7 x 1.6 in)  
0.3 kg (1.76 lbs)  
Weight  
Input Power  
9 to 12 VDC, 1A (from external power adapter)  
6.3 Watts  
Power Consumption  
Heat Dissipation  
Maximum Current  
Access Method  
Status LEDs  
21.5 BTU/hr  
1.0A @ 9 VDC  
CSMA/CD, 10 Mbps or 100 Mbps  
Power (green), Collision 100 (green),  
Collision 10 (green), Link (10Mbps - yellow;  
100Mbps - green)/Activity (flashing), Memory  
Error (yellow)  
Environmental  
Temperature  
0° - 50°C / 32° - 122°F (Standard Operating)  
-40° - 70°C / -40° - 158°F (Storage)  
5 - 95% (Noncondensing)  
Humidity  
Certification  
Emissions  
CE Mark  
FCC Class B, VCCI Class B,  
EN55022 (CISPR 22)  
Class B, C-Tick - AS/NZS 3548 (1995)  
Class B,  
IEC 1000-4-2/3/4  
Safety  
CSA/NRTL (C22.2.950, UL 1950), TÜV/GS  
(EN60950), IEC60950 (CB Report)  
 
5
Quick Installation Guide  
Certification  
FCC Class B Certification  
This device complies with Part 15 of the FCC Rules. Operation  
is subject to the following conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
Warning: This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to Part 15 of  
the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different  
from the one which the receiver is connected to  
Consult the dealer or an experienced radio/TV technician for  
help  
You are cautioned that changes or modifications not expressly  
approved by the party responsible for compliance could void  
your authority to operate the equipment.  
Note: In order to maintain compliance with the limits of a  
Class B digital device, Accton requires that you use a quality  
interface cable when connecting to this device. Changes or  
modifications not expressly approved by Accton could void your  
authority to operate this equipment. Suggested cable type is  
unshielded or shielded (UTP/STP) cable – Category 3 or  
greater for 10Mbps connections, and Category 5 for 100Mbps  
connections.  
Class B (Canada Department of Communications)  
This digital apparatus does not exceed the Class B limits for  
radio noise emissions from digital apparatus as set out in the  
interference-causing equipment standard entitled "Digital  
Apparatus", ICES-003 of the Department of Communications.  
Cet appareil numérique respecte les limites de bruits  
radioélectriques applicables aux appareils numériques de  
Classe B prescrites dans la norme sur le matériel brouilleur:  
"Appareils Numérques", NMB-003 édictée par le ministère des  
Communications.  
 
6
CheetaHub Power-3004E  
VCCI Class B Compliance (Japan)  
CE Mark Declaration of Conformance (for EMI  
and Safety - Europe)  
This is to certify that this product complies with ISO/IEC Guide  
22 and EN45014. It conforms to the following specifications:  
EMC: EN55022(1988)/CISPR-22(1985) class B  
EN60555-2(1995)  
EN60555-3  
class B  
IEC1000-4-2(1995)  
IEC1000-4-3(1995)  
IEC1000-4-4(1995)  
4kV CD, 8kV AD  
3V/m  
1kV - (power line),  
0.5kV - (signal line)  
This product complies with the requirements of the Low Voltage  
Directive 73/23/EEC and the EMC Directive 89/336/EEC.  
Warning! Do not plug a phone jack connector in the RJ-45 port.  
This may damage this device. Les raccordeurs ne sont pas  
utilisé pour le système téléphonique!  
Safety Compliance  
Underwriters Laboratories Compliance Statement  
Important! Before making connections, make sure you have the  
correct Cord Set. Check it (read the label on the cable) against  
the following specification list.  
Voltage  
120 Volts  
Cord Set Specifications  
UL Listed/CSA Certified Cord Set  
Minimum 18 AWG; type SVT or SJT three conductor cord  
Maximum length of 15 feet  
Parallel blade, grounding type attachment plug rated 15A, 125V  
UL Listed/CSA Certified Cord Set  
240 Volts  
(North America)  
Minimum 18 AWG; type SVT or SJT three conductor cord  
Maximum length of 15 feet  
Tandem blade, grounding type attachment plug rated 15A, 125V  
240 Volts  
(Europe only)  
Cord Set with H05VV-F cord having three conductors with minimum  
diameter of 0.75 mm²  
IEC-320 receptacle; male plug rated 10A, 250V  
 
7
Quick Installation Guide  
Wichtige Sicherheitshinweise (German Safety Statement)  
1. Bitte lesen Sie diese Hinweise sorgfältig durch.  
2. Heben Sie diese Anleitung für den späteren Gebrauch auf.  
3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen.  
Verwenden Sie keine FlüssigoderAerosolreiniger. Am besten eignet  
sich ein angefeuchtetes Tuch zur Reinigung.  
4. Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und  
leicht zugänglich sein.  
5. Das Gerät ist vor Feuchtigkeit zu schützen.  
6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten.  
Ein Kippen oder Fallen könnte Beschädigungen hervorrufen.  
7. Die Belüftungsöffnungen dienen der Luftzirkulation, die das Gerät vor  
Überhitzung schützt. Sorgen Sie dafür, daß diese Öffnungen nicht  
abgedeckt werden.  
8. Beachten Sie beim Anschluß an das Stromnetz die Anschlußwerte.  
9. Verlegen Sie die Netzanschlußleitung so, daß niemand darüber fallen  
kann. Es sollte auch nichts auf der Leitung abgestellt werden.  
10. Alle Hinweise und Warnungen, die sich am Gerät befinden, sind zu  
beachten.  
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten  
Sie es vom Stromnetz trennen. Somit wird im Falle einer  
Überspannung eine Beschädigung vermieden.  
12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder  
Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.  
elektrischen Schlag auslösen.  
13. Öffnen sie niemals das Gerät. Das Gerät darf aus Gründen der  
elektrischen Sicherheit nur von authorisiertem Servicepersonal  
geöffnet werden.  
14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu  
trennen und von einer qualifizierten Servicestelle zu überprüfen:  
a. Netzkabel oder Netzstecker sind beschädigt.  
b. Flüssigkeit ist in das Gerät eingedrungen.  
c. Das Gerät war Feuchtigkeit ausgesetzt.  
d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend  
funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung  
erzielen.  
e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.  
f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.  
15. Stellen Sie sicher, daß die Stromversorgung dieses Gerätes nach der  
EN 60950 geprüft ist. Ausgangswerte der Stromversorgung sollten die  
Werte von AC 7,5-8V, 50-60Hz nicht über oder unterschreiten sowie  
den minimalen Strom von 1A nicht unterschreiten.  
Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000  
beträgt 70dB(A) oder weniger.  
 
8
Warranty  
Accton warrants to the original owner that the product delivered in this  
package will be free from defects in material and workmanship for a  
period of three (3) years from the date of purchase from Accton or its  
authorized reseller. For the warranty to apply, you must register your  
purchase by returning the registration card indicating the date of  
purchase and including proof of purchase. There will be a minimal charge  
to replace consumable components, such as fuses, power transformers,  
and mechanical cooling devices. The warranty does not cover the  
product if it is damaged in the process of being installed. Accton  
recommends that you have the company from whom you purchased this  
product install it.  
THEABOVE WARRANTY IS IN LIEU OFANY OTHER WARRANTY,  
WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUTNOT  
LIMITED TOANYWARRANTY OF MERCHANTABILITY, FITNESS FORA  
PARTICULAR PURPOSE, ORANY WARRANTYARISING OUT OFANY  
PROPOSAL, SPECIFICATION OR SAMPLE.ACCTON SHALLNOT BE  
LIABLE FOR INCIDENTALOR CONSEQUENTIALDAMAGES.ACCTON  
NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR  
ITANY OTHER LIABILITY.  
Copyright  
Copyright © 2000 by Accton Technology Corporation. All rights reserved.  
No part of this document may be copied or reproduced in any form or by  
any means without the prior written consent of Accton Technology  
Corporation.  
Trademarks  
Accton is a trademark of Accton Technology Corporation. Other  
trademarks or brand names mentioned herein are trademarks or  
registered trademarks of their respective companies.  
Disclaimer  
Accton makes no warranties with respect to this documentation and  
disclaims any implied warranties of merchantability, quality, or fitness for  
any particular purpose. The information in this document is subject to  
change without notice. Accton reserves the right to make revisions to  
this publication without obligation to notify any person or entity of any  
such changes.  
International Headquarters  
No. 1 Creation Road III,  
USA Headquarters  
6Hughes  
Science-based Industrial Park  
Hsinchu 300, Taiwan, R.O.C.  
Phone: 886-3-5770-270  
Irvine, CA 92618  
Phone Numbers -  
Sales:  
800-926-9288  
FAX: 886-3-5770-267  
Support: 888-398-4101 or 949-707-4847  
Internet: [email protected]  
RMA:  
FAX:  
800-762-4968  
949-707-2460  
EH3004E-TX  
E012000-R01  
150389-102  
 

3M Home Theater System SCP725 User Manual
Abocom Network Card WB1500SH User Manual
Acer Server G610 User Manual
Advanced Wireless Solutions Portable Radio TK 2180 3180 User Manual
Agilent Technologies Network Card 85225F User Manual
Airlink101 Network Router AR680W User Manual
ATI Technologies Computer Hardware X1800 User Manual
Ativa Speaker System DS 955 User Manual
Avital Automobile Alarm AMX58 User Manual
Banner Home Safety Product PLI A10 User Manual