Asus Car Video System VG278HR User Manual

VG278HR Series  
LCD Monitor  
User Guide  
 
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
As an Energy Star® Partner, our company has determined  
that this product meets the Energy Star® guidelines for energy  
efficiency.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
iii  
 
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extension cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, in case use at a PC then it should  
use the monitor only with computers which have appropriate  
configured receptacles marked between 100-240V AC.  
If you encounter technical problems with the monitor, contact a  
qualified service technician or your retailer.  
The wall socket shall be installed near the equipment and shall be  
easily accessible.  
iv  
 
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the  
cables and power cord. Follow the correct lifting techniques when  
positioning the monitor. When lifting or carrying the monitor, grasp the  
edges of the monitor. Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the  
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  
may be removed with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner  
intended for use with the LCD. Never spray cleaner directly on the  
screen, as it may drip inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the  
fluorescent light. Turn off the Power Switch and turn it on again to  
make sure that the flicker disappears.  
You may find slightly uneven brightness on the screen depending on  
the desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the  
previous screen may remain after switching the image. The screen will  
recover slowly or you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore,  
contact your dealer or service center to fix it. Do not repair the screen  
by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to aid in completing a task.  
v
 
Where to find more information  
Refer to the following sources for additional information and for product  
and software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may  
have been added by your dealer. These documents are not part of  
the standard package.  
vi  
 
1.1  
Welcome!  
Thank you for purchasing the ASUS® LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a crisper,  
broader, and brighter display, plus a host of features that enhance your  
viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the monitor brings you!  
1.2  
Package contents  
Check your package for the following items:  
LCD Monitor  
Power Cord  
VGA Cable  
DVI (Dual-Link) Cable  
3.5mm Audio Cable  
NVIDIA® 3D Vision™ Glasses  
Support CD  
Demo DVD  
Quick Start Guide  
Warranty Card  
If any of the above items is damaged or missing, contact your retailer immediately.  
ASUS VG278HR Series LCD Monitor  
1-1  
 
1.3  
Monitor introduction  
1.3.1  
Front view  
1
2
3
4
5
6
7
1.  
Button:  
GamePlus hotkey. Press to select and MENU to confirm the  
function needed.  
2.  
Button:  
Automatically adjust the image to its optimized position, clock,  
and phase by long pressing this button for 2-4 seconds (for VGA  
mode only).  
Use this hotkey to switch from six video preset modes (Scenery  
Mode, Standard Mode, Theater Mode, Game Mode, Night View  
Mode, and sRGB Mode) with SPLENDID™ Video Intelligence  
Technology.  
Exit the OSD menu or go back to the previous menu as the OSD  
menu is active.  
The Splendid, Contrast and Brightness adjustment functions will be temporarily  
disabled while 3D function is activated.  
3.  
Button:  
Press this button to decrease the value of the function selected  
or move to the next functions.  
1-2  
Chapter 1: Product Introduction  
 
Volume hotkey  
Button:  
4.  
5.  
Press this button to enter/select the icon (function) highlighted  
while the OSD menu is activated.  
Exits the hotkey OSD menu.  
Button:  
Press this button to increase the value of the function selected  
or move to the previous function.  
Brightness hotkey  
6.  
7.  
Input Select Button:  
Press this button to select input source.  
Power Button/Power Indicator:  
Press this button to turn the monitor on/off.  
The color definition of the power indicator is shown below.  
Status  
Blue  
Description  
ON  
Amber  
OFF  
Standby mode  
OFF  
ASUS VG278HR Series LCD Monitor  
1-3  
 
1.3.2  
Back view  
1
2
3
4
5
6
7
Rear connectors  
1. Kensington lock slot.  
2. AC-IN port: This port connects the power cord.  
3. VGA port: This 15-pin port is for PC VGA connection.  
4. DVI port: This 24-pin port is for PC (Personal Computer) DVI-D digital  
signal connection (support NVIDIA® 3D Vision™).  
The 3D feature is only supported through HDMI-IN and DVI port.  
5. HDMI-IN port: This port is for connection with an HDMI compatible  
device (support NVIDIA® 3D Vision™ and Blu-ray 3D).  
6. PC Audio-In Jack: This 3.5mm stereo jack is for PC audio connection.  
7. Earphone-Out Jack: This 3.5mm stereo jack is for earphone audio  
connection.  
1-4  
Chapter 1: Product Introduction  
 
1.3.3  
GamePlus Function  
The GamePlus Function provides a toolkit and creates a better gaming  
environment for users when playing different types of games. Particularly, Aimpoint  
function is specially designed for new gamers or beginners interested in First  
Person Shooter (FPS) games.  
To active GamePlus:  
1. Press the GamePlus hotkey.  
2. Press  
to select between Aimpoint and Timer function.  
3. Press MENU to confirm the function you choose, and  
to go  
back, off, and exit.  
GamePlus Main Menu  
GamePlus - Aimpoint  
GamePlus  
Aimpoint  
Timer  
(Practice Mode)  
: Exit / Off  
: Select  
MENU : OK  
: Exit / Off  
: Select  
MENU : OK  
GamePlus - Timer  
GamePlus - Timer - Position  
Position  
: Exit / Off  
: Select  
MENU : OK  
: Exit / Off  
: Select  
MENU : OK  
ASUS VG278HR Series LCD Monitor  
 
1-5  
1.3.4  
Experiencing 3D Virtual Effects  
This monitor is a 3D Vision ready LCD monitor supports PC timing up to  
1920x1080@120Hz.  
To experience fully immersive stereoscopic 3D virtual effects, you will  
require an NVIDIA® 3D Vision™ kit, a compatible NVIDIA-GPU graphics  
card, and a computer with Microsoft® Windows® Vista or Windows® 7  
The video formats supported for 3D vision of HDMI input are “Frame Packing”,  
Side by Side(Half)”, and “Top-and-Bottom”. Please refer to Section 3.4 for  
timing list.  
To connect the DVI(Dual link) or HDMI cable  
Connect with a DVI(Dual link) or HDMI cable to the monitor and your  
computer. You can use the HDMI cable only if your computer has an HDMI  
compliance graphics card that is either integrated or installed.  
To support 3D Vision, please make sure the HDMI cable is properly connected the  
monitor and your 3D Vision compatible graphics card.  
1-6  
Chapter 1: Product Introduction  
 
1.3.5  
How to use your wireless 3D glasses  
Charge your wireless glasses before using:  
Connect one end of the USB cable to your PC or notebook that equipped  
with USB port, and the other end to the micro USB port of the glasses.  
USB Connection  
Used to recharge the glasses.  
Press the On/Off button:  
Press the On/Off button to turn on or off the power for this 3D glasses. You  
may check the built-in battery status by examing the light:  
Green: The battery is fully charged.  
Red: The battery is running out, and needs recharge.  
No Light: The battery is exhausted, and needs recharge immediately.  
Green  
Red  
On/Off Button  
Press button for battery status  
ASUS VG278HR Series LCD Monitor  
1-7  
 
2.1  
Assembling the monitor base  
To assemble the monitor base:  
1. Attach the base to the arm.  
2. Fix with the screws to joint the base with the arm. You can easily  
tighten the screws by fingers.  
3. Remove the height adjustment lock from the arm.  
1
2
3
The height adjustment lock should NEVER be removed BEFORE you place the  
monitor VERTICALLY on a flat and clean table.  
ASUS VG278HR Series LCD Monitor  
2-1  
 
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable  
for you.  
Hold the base to prevent the monitor from falling when you change its  
angle.  
You can tilt the monitor’s from -5˚ to +15˚, swivel from left-to-right for  
150˚, and lift the monitor’s height for about 100mm.  
-5° ~ +15°  
150°  
150°  
0°  
100mm  
It is normal that the monitor slightly shakes while you adjust the viewing angle.  
2-2  
Chapter 2: Setup  
 
2.3  
Detaching the arm (for VESA wall  
mount)  
The detachable arm of this monitor is specially designed for VESA wall  
mount.  
To detach the arm:  
1. Disconnect power and signal cables.  
2. Lower the monitor to its lowest height, and then insert the height  
adjustment lock.  
3. Carefully put the front of the monitor face down on a flat and clean  
table.  
4. Use a screwdriver to remove the four screwdrivers on the arm, and  
then detach the arm from the monitor.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
Hold the stand while removing the screws.  
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.  
Use only the UL Listed Wall Mount Bracket with minimum weight/load 33.2kg  
(Screw size: M4 x 10 mm).  
ASUS VG278HR Series LCD Monitor  
2-3  
 
3.1  
OSD (On-Screen Display) menu  
3.1.1  
How to configure  
VG278  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Input Select  
System Setup  
Night View Mode  
sRGB  
Move  
Menu  
Exit  
1. Press [  
2. Press [  
] button to activate the OSD menu.  
] or [ ] button to navigate through the functions.  
Highlight and activate the desired function by pressing [  
]
button. If there is a sub-menu in the function selected, press [  
]
or [  
] button again to navigate through the sub-menu functions.  
Highlight and activate the desired sub-menu function by pressing  
[
] button.  
] or [  
3. Press [  
function.  
] button to change the settings of the selected  
4. To exit the OSD menu, press [ ] button. Repeat step 2 and step 3 to  
adjust any other function.  
3-1  
Chapter 3: OSD (On-Screen Display) Menu  
 
3.1.2  
1. Splendid  
This function contains six sub-functions you can select for your  
OSD Function Introduction  
preference. Each mode has the Reset selection, allowing you to  
maintain your setting or return to the preset mode.  
VG278  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Input Select  
System Setup  
Night View Mode  
sRGB  
Move  
Menu  
Exit  
Scenery Mode: The best choice for scenery photo display with  
SPLENDID™ Video Enhancement.  
Standard Mode: The best choice for document editing with  
SPLENDID™ Video Enhancement.  
Theater Mode: The best choice for movie with SPLENDID™  
Video Enhancement.  
Game Mode: The best choice for game playing with  
SPLENDID™ Video Enhancement.  
Night View Mode: The best choice dark-scene game or movie  
with SPLENDID™ Video Enhancement.  
sRGB Mode: Compatible with sRGB color space. sRGB mode  
is the best choice for document editing.  
In the Standard Mode, the Saturation and ASCR functions are not user-  
configurable.  
In the other modes, the sRGB function is not user-configurable.  
ASUS VG278HR Series LCD Monitor  
3-2  
 
2. Color  
Set a desired color setting from this menu.  
VG278  
Splendid  
Color  
Brightness  
Contrast  
90  
80  
Image  
Saturation  
Color Temp.  
50  
Input Select  
System Setup  
User Mode  
Skin Tone  
Natural  
OFF  
Smart View  
TM  
NVIDIA Lightboost  
Move  
Menu  
Exit  
Brightness: The adjusting range is from 0 to 100. The  
button is a hotkey to activate this function.  
Contrast: The adjusting range is from 0 to 100.  
Saturation: The adjusting range is from 0 to 100.  
Color Temp.: Contains four color modes: “Cool”, “Normal”,  
Warm”, and “User Mode”.  
In the User mode for Color Temp., the colors of R (Red), G (Green), and B (Blue)  
are user-configurable; the adjusting range is from 0 to 100.  
Skin Tone: Contains three color modes including “Reddish”,  
Natural”, and “Yellowish”.  
Smart View: Enable a clearer visibility after tilted the screen.  
NVIDIA® Lightboost™: With the 3D signal input connected, this  
option will be available to adjust lightness. Press [  
] or  
[
] button to change the settings.  
VG278  
3D-Mode  
Splendid  
Color  
Brightness  
Contrast  
90  
76  
Image  
Saturation  
Color Temp.  
50  
Input Select  
System Setup  
User Mode  
Skin Tone  
Natural  
OFF  
Smart View  
TM  
NVIDIA Lightboost  
OFF  
MAX  
Move  
Menu  
Exit  
3-3  
Chapter 3: OSD (On-Screen Display) Menu  
 
3. Image  
Set the image related setting from this menu.  
VG278  
Splendid  
Color  
Sharpness  
Trace Free  
Aspect Control  
ASCR  
50  
60  
Image  
Full  
OFF  
Input Select  
System Setup  
3D Mode Selection  
Position  
Focus  
Move  
Menu  
Exit  
Sharpness: Adjust the picture sharpness. The adjusting range  
is from 0 to 100.  
Trace Free: Speed up the response time. The adjusting range is  
from 0 to 100.  
Aspect Control: Adjust the aspect ratio to “4:3”, “Full”, or  
OverScan”. (The “OverScan” ratio is only available for HDMI  
input.)  
ASCR: Turn on or off the ASCR (ASUS Smart Contrast Ratio)  
function. (Only available at Scenery Mode, Theater Mode,  
Game Mode, and Night View Mode.)  
3D Mode Selection (Only available for HDMI input with 720P,  
1080i, 1080P timing):  
Default: 2D model  
3D Top-and-Bottom: Deal the 3D screen by the way of  
Top-and-Bottom  
3D Side-by-Side(Half): Deal the 3D screen by the way of  
Side-by-Side(Half)  
Position: Adjust the horizontal position (H-Position) and the  
vertical position (V-Position) of the image. The adjusting range is  
from 0 to 100. (Only available for VGA input.)  
Focus: Reduce Horizontal-line noise and Vertical-line noise  
of the image by adjusting (Phase) and (Clock) separately. The  
adjusting range is from 0 to 100. (Only available for VGA input.)  
ASUS VG278HR Series LCD Monitor  
3-4  
 
Phase adjusts the phase of the pixel clock signal. With a wrong phase  
adjustment, the screen shows horizontal disturbances.  
Clock (pixel frequency) controls the number of pixels scanned by one  
horizontal sweep. If the frequency is not correct, the screen shows vertical  
stripes and the image is not proportional.  
4. Input Select  
Select the input source from “VGA”, “DVI”, or “HDMI”.  
VG278  
Splendid  
Color  
VGA  
DVI  
Image  
HDMI  
Input Select  
System Setup  
Move  
Menu  
Exit  
Only the VGA and DVI input supports the “Auto scan” function.  
5. System Setup  
Adjust the system configuration.  
VG278  
Splendid  
Color  
Splendid Demo Mode  
OFF  
50  
Volume  
Image  
3D IR Mode  
ECO Mode  
Normal  
OFF  
Input Select  
System Setup  
OSD Setup  
Language  
English  
1/2  
Move  
Menu  
Exit  
3-5  
Chapter 3: OSD (On-Screen Display) Menu  
 
VG278  
Splendid  
Color  
Information  
All Reset  
Image  
Input Select  
System Setup  
2/2  
Move  
Menu  
Exit  
Splendid Demo Mode: Splits the screen into two for Splendid  
modes comparison. (Only available at Scenery Mode, Theater  
Mode, Game Mode, and Night View Mode.)  
Volume: Adjusts the speaker and earphone output volume  
level. The adjusting range is from 0 to 100.  
3D IR Mode: Select output power for the built-in IR emitter.  
Select “LAN Party” for an environment with multiple IR emitters  
to prevent mutual interference. Select “Consumer compatible”  
for a longer distance positioning.  
ECO Mode: Activate the ecology mode for power saving. (Some  
gray levels may not be distinguished if ECO is ON. Its brightness  
is lower than that when setting the Contrast Ratio to 100.)  
OSD Setup:  
H-Position / V-Position: Adjusts the horizontal position  
(H-Position) or the vertical position (V-Position) of the OSD  
from 0 to 100.  
OSD Timeout: Adjusts the OSD timeout from 10 to 120  
seconds.  
DDC/CI: Enables or disables the DDC/CI function.  
Transparency: Adjusts the OSD background from opaque  
to transparent.  
Language: There are 10 languages for your selection, including  
English”, “French”, “German”, “Spanish”, “Italian”, “Dutch”,  
Russian”, “Traditional Chinese”, “Simplified Chinese”, and  
Japanese”.  
Information: Shows the monitor information.  
All Reset: Select “Yes” to restore the default settings.  
ASUS VG278HR Series LCD Monitor  
3-6  
 
3.2  
Specifications  
Panel Type  
TFT LCD  
Panel Size  
27” W (68.6 cm)  
72% (sRGB)  
1920 x 1080 (up to 144Hz)  
Yes  
Color Saturation(NTSC)  
True Resolution  
Full HD 1080P  
Pixel Pitch  
0.311 mm  
Brightness (Typ.)  
Contrast Ratio (Typ.)  
300 cd/m2  
1000:1  
ASUS Smart Contrast Ratio (ASCR) 50,000,000:1 (with ASCR on)  
Viewing Angle (H/V) CR10  
Display Colors  
170°(H) /160°(V)  
16.7 M  
Response Time  
2 ms (Gray to gray)  
Trace Free Technology  
SPLENDID™ Video Enhancement  
SPLENDID™ Selection  
Skin-Tone Selection  
Color Temperature Selection  
HDCP  
Yes  
Yes  
6 video preset modes (by hotkey)  
3 modes  
4 modes  
Yes  
Stereo Speaker  
3W x 2 stereo, RMS  
Auto Adjustment Hotkey  
Brightness Adjustment Hotkey  
Volume Adjustment Hotkey  
Input Selection Hotkey  
PC Input  
Yes  
Yes  
Yes  
Yes  
Dual-link DVI-D(support NVIDIA 3D Vision),  
D-Sub  
PC Audio Input  
Video Input  
AV Audio Input  
Earphone Jack  
Chassis Colors  
Power LED  
Yes (3.5mm Mini-jack)  
HDMI 1.4 (support Blu-ray 3D)  
HDMI 1.4  
Yes (3.5mm Mini-jack)  
Black  
Blue (On) / Amber (Standby)  
+15˚ ~ -5˚  
Tilt  
Swivel  
+150˚ ~ -150˚  
Height Adjustment  
100 mm  
3-7  
Chapter 3: OSD (On-Screen Display) Menu  
 
VESA Wall Mounting  
Kensington Lock  
100 x 100 mm  
Yes  
AC Input Voltage  
AC: 100 ~ 240V  
Power Consumption  
Power On: < 50 W (Max.)  
Energy Star: < 37.25 W  
Standby: < 1 W (Typ.)  
Power Off: < 1 W  
Temperature (Operating)  
Temperature (Non-operating)  
Dimension (W x H x D)  
0˚C ~ +35˚C  
-20˚C ~ +60˚C  
548.75 x 414.19 x 201 mm (machine)  
711 x 540 x 227 mm (package)  
Weight (Esti.)  
8.3 kg (Net); 12.1 kg (Gross)  
Regulation approvals  
Energy Star®, ErP, UL/cUL, CB, CE,  
FCC, CCC, BSMI, Gost-R, C-Tick, VCCI,  
J-MOSS, PSB, RoHS, WEEE, Windows 7  
WHQL  
*Specifications subject to change without notice.  
ASUS VG278HR Series LCD Monitor  
3-8  
 
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to  
the monitor and the power outlet.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly  
working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move away electrical devices that may cause  
electrical interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform All Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
3D function is not working well  
Make sure the input source is DVI (Dual-link) or  
HDMI, and the cable is connected. DVI (Single-link)  
& VGA are not supported for 3D function.  
For DVI source: Make sure the screen resolution  
setting is 1920x1080 at 120Hz, 110Hz or 100Hz.  
For HDMI source: Make sure your graphics card or  
DVD player support HDMI 1.4.  
Make sure the power button of wireless 3D glasses  
is turned on. Charge the wireless glasses if its  
battery is in low status.  
Make sure the computer was installed with  
Microsoft® Windows Vista or Windows 7 operating  
system, and NVIDIA 3D drivers.  
Visit NVIDIA website (http://www.nvidia.com/) for  
more information about system requirements, setup  
instructions, and PC games supported.  
3-9  
Chapter 3: OSD (On-Screen Display) Menu  
 
3.4  
Supported Timing List  
Resolution  
640x480  
Refresh Rate  
60Hz  
67Hz  
75Hz  
70Hz  
85Hz  
56Hz  
60Hz  
72Hz  
75Hz  
75Hz  
60Hz  
60Hz  
70Hz  
75Hz  
75Hz  
60Hz  
60Hz  
75Hz  
60Hz  
75Hz  
60Hz  
60Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
60Hz  
60Hz  
Horizontal  
31.469KHz  
35KHz  
640x480  
640x480  
37.5KHz  
720x400  
31.469KHz  
37.927KHz  
35.156KHz  
37.879KHz  
48.077KHz  
46.875KHz  
49.725KHz  
31.02KHz  
48.363KHz  
56.476KHz  
60.023KHz  
67.5KHz  
720x400  
800x600  
800x600  
800x600  
800x600  
832x624  
848x480  
1024x768  
1024x768  
1024x768  
1152x864  
1280x960  
1280x1024  
1280x1024  
1440x900  
1440x900  
1680x1050  
1920x1080  
1280x720  
1280x720  
1280x720  
1280x768  
1280x800  
1280x800  
1280x800  
1366x768  
1440x900  
1680x1050  
1920x1080  
60KHz  
63.981KHz  
79.976KHz  
55.935KHz  
70.635KHz  
65.29KHz  
67.5KHz  
44.444KHz  
44.772KHz  
56.456KHz  
47.396KHz  
49.306KHz  
49.702KHz  
62.795KHz  
47.712KHz  
55.469KHz  
64.674KHz  
66.587KHz  
ASUS VG278HR Series LCD Monitor  
 
3-10  
Resolution  
Refresh Rate  
Horizontal  
113.3 KHz(2D) /  
113.8KHz(3D)  
1920x1080* (DVI)  
100Hz  
125.1KHz(2D) /  
125.7KHz(3D)  
1920x1080* (DVI)  
110Hz  
1920x1080* (DVI)  
1920x1080* (DVI)  
640x480P (HDMI)  
720x480P (HDMI)  
720x576P (HDMI)  
1280x720P (HDMI)  
1280x720P (HDMI)  
1440x480P (HDMI)  
1440x576P (HDMI)  
1920x1080i (HDMI)  
1920x1080i (HDMI)  
1920x1080P (HDMI)  
1920x1080P (HDMI)  
120Hz  
137.2KHz(2D/3D)  
158.11KHz (2D)  
31.469KHz / 31.5KHz  
31.469KHz / 31.5KHz  
31.25KHz  
144Hz  
59.94/60Hz  
59.94/60Hz  
50Hz  
50Hz  
37.5KHz  
59.94/60Hz  
59.94/60Hz  
50Hz  
44.955KHz / 45KHz  
31.469KHz / 31.5KHz  
31.25KHz  
50Hz  
28.125KHz  
59.94/60Hz  
50Hz  
33.716KHz / 33.75KHz  
56.25KHz  
59.94/60Hz  
67.433 KHz / 67.5KHz  
3D Display Modes, Primary Timings List (HDMI input only)  
Resolution  
3D Video Format  
Horizontal  
Frame Packing  
Side by Side(Half)  
1280x720P 50Hz  
37.5KHz  
1280x720P 59.94/60Hz  
1920x1080i 50Hz  
Top-and-Bottom  
44.955KHz  
28.125KHz  
Side by Side(Half)  
Top-and- Bottom  
1920x1080i 59.94/60Hz  
1920x1080P 50Hz  
33.716KHz / 33.75KHz  
56.25KHz  
Side by Side(Half)  
Top-and- Bottom  
1920x1080P 59.94/60Hz  
67.433KHz / 67.5KHz  
Frame Packing  
1920x1080P 23.98/24Hz Side by Side(Half)  
Top-and-Bottom  
67.433KHz / 67.5KHz  
Note: you must select one of the “*” timing for enabling 3D or 144Hz feature with a compatible  
NVIDIA-GPU graphic card via Dual-link cable connection.  
3-11  
Chapter 3: OSD (On-Screen Display) Menu  
 

Agilent Technologies Portable Generator E8257D 67D User Manual
Agilent Technologies Portable Generator E8663B User Manual
Aiphone Intercom System C 123LW User Manual
Aiphone Switch NBJ 20 User Manual
Airfree Air Cleaner P125 User Manual
Allied Telesis Network Card AT WCC201 Series User Manual
Axis Communications Security Camera T8123 E User Manual
Banner Stud Sensor EZ ARRAY User Manual
Barco Laser Pointer 26 0405000 00 User Manual
BC Speakers Speaker 12 PS 32 User Manual