ND6-8/ND6-16
3-Inch High Frequency
NeodymiumTransducer
Key Features:
•
•
•
•
Extremely high acoustic output
Geometricallyoptimizedtitaniumdiaphragm
Very high sensitivity and reliability
Neodymiummagnetprovidesunprecedented
output to size ratio
•
•
•
•
Compact, ruggedandlightweight
1.4" exit diameter
2.0” exit diameter with ADH-6 adapter
Die-castaluminumheatsink
General Description:
Technical Specifications:
The Electro-Voice ND6 is a world-class high-frequency
compression driver capable of extremely high acoustic output
over a wide frequency range.
ND6-8
ND6-16
16 ohms
14 ohms
10 ohms
Nominal Impedance:
Minimum Impedance: 7 ohms @ 6 kHz
DC Resistance: 4.5 ohms
Freq. Response: 1000-20,000 Hz
8 ohms
Precise engineering, along with careful selection of materials
and advanced driver architecture, has resulted in a driver
that is ideally suited for the most demanding presentation of
high quality music and communications program.
Power Capacity1 : 75 Watts, 150 Watts Cont. Prog.
Recommended Crossover2 : 1000 Hz or higher
Nominal Efficiency: 28%
Incorporating Electro-Voice’s exclusive Ring Mode
Decoupling (RMD) through all design phases has produced
drivers with unmatched accuracy while minimizing acoustic
resonances and time domain ringing throughout the driver
structure.
Sound Pressure Level3 : 114 dB, HP420 Horn
(1 Watt @ 1 Meter) 112 dB, HP640 Horn
110 dB, HP940 Horn
Throat Diameter: 1.38" (35mm)
Voice Coil Diameter: 3" (75 mm)
Voice Coil Wire: Pure Aluminum Ribbon
The resulting small size and weight-to-power ratio of the ND6
assures easy installations where weight may be a concern.
The 2.15 Tesla flux density provided by the Neodymium
magnet exceeds that of conventional drivers at a fraction of
the size.
Diaphragm Construction: 0.05 mm Pure Titanium Dome and
Surround
A unique, geometrically optimized 3" titanium diaphragm,
consisting of a one-piece dome and suspension system gives
these drivers an ideal combination of superb high-frequency
response and resistance to fatigue.
Electrical Connection: Screw Terminals (Accepts a pair of
12GA Wires
Polarity: Positive Voltage to Positive Terminal
Produces a Positive Acoustic
Pressure
Integrated into the ND6’s design is a finned aluminum heatsink
to increase power handling and reliability.
Flux Density: 2.15 Tesla
Net Weight (each): 5.5 lbs (2.5 kg)
Shipping Weight: 6.5 lbs (3.0 kg)
1 Power capacity per AES standard. Continuous pink noise with a 6 dB crest factor, 2 hours.
2 For applications below 1000 Hz, use ND6x.
3 Sound Pressure measured on axis in the far field with 1 Watt input of band-limited pink noise from 1000 - 5000 Hz
and calculated to 1 Meter equivalent by inverse square law.
|
Coleman Tent 2000007830 User Manual
Crate Amplifiers Musical Instrument Amplifier MXB15 User Manual
Delta Electronics Power Supply HCB0750 User Manual
DLS Svenska AB Speaker System Sub 310 User Manual
Eureka Vacuum Cleaner S670A User Manual
EVGA Computer Hardware 120 LF E650 TR User Manual
Extron electronic Stereo Amplifier FOX 500 DA6 User Manual
Gigabyte Network Router GN BR30N RH User Manual
Gitzo Camcorder Accessories G1227LVL User Manual
Gitzo Camcorder Accessories G1504 User Manual